1. Fault phenomenon The clutch pedal is stepped to the end, and the power between the clutch active and driven plates cannot be completely cut off, resulting in difficult gear catching, beating teeth or failing to stop, and clutch heating. 2, the cause of the failure and exclusion (1) The clearance between the three separation claws of the clutch and the release bearing is excessive. Should be adjusted to the range of 0.3-0.5 mm. (2) The free travel of the clutch pedal is too large. Should be adjusted to the 20-40 mm range. (3) The clutch disc is warped and deformed seriously or rusted. Correct or replace new parts or remove rust. (4) The clutch shaft wears heavily, causing the driven plate to move. Should trim or replace new parts. (5) The three separate levers are not easy to be in the same plane of rotation, resulting in different spring force removal. Should be adjusted according to regulations. (6) The friction plate is broken. Should replace the new film. The clutch bearing is damaged, causing the clutch to move axially when the clutch is disengaged. Should replace the new bearing. For more information on the supply, purchase, and investment of agricultural tricycles, please pay attention to the China Agricultural Tricycle Trade Network.
Curekind ZBS, can significantly improve product performance. Combine used with Actmix DPTT-70 & Actmix ZDMC-80 as rubber foaming promoters for foaming of air-conditioning insulation pipes.
Rubber Processing Activator, Activator ZBS, Rubber Foaming Promoter ZBS Ningbo Actmix Rubber Chemicals Co.,Ltd. , https://www.predispersedchemical.com