Application A tree chipper or woodchipper is a machine used for reducing wood (generally tree limbs or trunks) into smaller woodchips. They are often portable, being mounted on wheels on frames suitable for towing behind a truck or van. Power is generally provided by an internal combustion engine from 3 horsepower (2.2 kW) to 1,000 horsepower (750 kW). There are also high power chipper models mounted on trucks and powered by a separate engine. These models usually also have a hydraulic crane. Raw material Product Advantage 1.Advanced structure, high quality cutting chippers, wide scope of application, simple operation, easy maintenance; 2.Wear-resistant sharp alloy tool, reliable advanced and to enhance its service life; 3.Wearing parts low-consumption, low running cost. Application A tree chipper or woodchipper is a machine used for reducing wood (generally tree limbs or trunks) into smaller woodchips. They are often portable, being mounted on wheels on frames suitable for towing behind a truck or van. Power is generally provided by an internal combustion engine from 3 horsepower (2.2 kW) to 1,000 horsepower (750 kW). There are also high power chipper models mounted on trucks and powered by a separate engine. These models usually also have a hydraulic crane. Raw material Product Advantage 1.Advanced structure, high quality cutting chippers, wide scope of application, simple operation, easy maintenance; 2.Wear-resistant sharp alloy tool, reliable advanced and to enhance its service life; 3.Wearing parts low-consumption, low running cost. Heat Treated Steel Bar And Tube
HEAT TREATED STEEL BAR AND TUBE
Heat treated steel bar is produced by heating and cooling in different temperature based on the steel grades to improve the steel bar mechanical properties or machinability for various industrial applications. Heat treated steel bar includes annealed steel bars, Normalized Steel Bar, quenched and temper qt steel bar.
Annealed Steel Bar has better ductility and lower hardness, which can be easier to be machined. The annealing processing is usually widely used for steel grade with higher carbon content above 0.5%. However, some low carbon steel also requires to do annealing for special usage such as 20CrMnTi gear steel. For some special material such as 20CrMnTi gear steel and GCr15 such bearing steel, spheroidizing annealing is often required.
Normalized steel bar sometime is also one kind of annealing processing. It mainly changes the grain to remove the impurities in steel and improves the strength and hardness. For some hot rolled steel bars, to keep the basic mechanical properties, normalizing is often used.
Quenching and Tempering, abbreviated as Q&T is a king of processing that strengthen or harden steel bars by heating the materials and then cooling in water, oil or other liquid medium, that rapidly the change from austenite to perlite to get the proper properties for various usage. The quenched & tempered steel bar materials are usually with carbon from 0.30% - 0.60%, it is widely used as merchant bars in components of various machines.
Our advantages on producing heat treated steel bars:
1) Big stocks of hot rolled round bars or wire rods as raw materials
2) Wide range of Cold Drawn Steel Bar sizes: from 10mm to 150mm
3) Different cold drawing medias powder or oil to get different surface
4) Straightening machines to get better straightness up to 0.5mm/m
5) Grinding and polishing machines to get better roughness upto 0.4um
6) Heat treating furnaces to adjust the mechanical properties
7) Full sets of testing equipment to test the sizes, mechanical properties and microstructure.
8) Multiple packages to avoid broken packages and anti-rusty
4140 steel tube,Round Steel Tubing,Heat Treated Steel Tube,Heat Treated Steel Bar And Tube,S355JR steel tube SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.js-luggagecarts.com
Tree chippers are typically made of a hopper with a collar, the chipper mechanism itself, and an optional collection bin for the chips. A tree limb is inserted into the hopper (the collar serving as a partial safety mechanism to keep human body parts away from the chipping blades) and started into the chipping mechanism. The chips exit through a chute and can be directed into a truck-mounted container or onto the ground. Typical output is chips on the order of 1 inch (2.5 cm) to 2 inches (5.1 cm) across in size. The resulting wood chips have various uses such as being spread as a ground cover or being fed into a digester during papermaking.Most woodchippers rely on energy stored in a heavy flywheel to do their work (although some use drums).Â
Pine wood, weed tree wood, poplar wood, fir wood, slab, veneer, bamboo, corm stalk, cotton, reeds and other non-wood fiber rod materials.
Â
Specification
Model
Power(KW)
Capacity(t/h)
B215
45+4+3+1.5
2-4
B216
55+4+3+1.5+1.5
4-6
B218
110+5.5+4+1.5+1.5
8-12
B2113
220+7.5x2+1.5
15-20
Customer Visit
After-sales team
Â
Tree chippers are typically made of a hopper with a collar, the chipper mechanism itself, and an optional collection bin for the chips. A tree limb is inserted into the hopper (the collar serving as a partial safety mechanism to keep human body parts away from the chipping blades) and started into the chipping mechanism. The chips exit through a chute and can be directed into a truck-mounted container or onto the ground. Typical output is chips on the order of 1 inch (2.5 cm) to 2 inches (5.1 cm) across in size. The resulting wood chips have various uses such as being spread as a ground cover or being fed into a digester during papermaking.Most woodchippers rely on energy stored in a heavy flywheel to do their work (although some use drums).Â
Pine wood, weed tree wood, poplar wood, fir wood, slab, veneer, bamboo, corm stalk, cotton, reeds and other non-wood fiber rod materials.
Â
Specification
Model
Power(KW)
Capacity(t/h)
B215
45+4+3+1.5
2-4
B216
55+4+3+1.5+1.5
4-6
B218
110+5.5+4+1.5+1.5
8-12
B2113
220+7.5x2+1.5
15-20
Customer Visit
After-sales team
Â
B218 Drum Type Big Capacity Wood Chipper Cutter
Model NO.: B218
Cutter Material: High-Speed Steel
Finished Surface: Outer Surface Process
Compressive Strength (For Crushing): >300MPA
Tongs′ Features: Adjustable Tongs
Weight: 2.6
Trademark: Kingoro
Transport Package: Wooden Case
Specification: 2640x1240x1420
Origin: China
HS Code: 84793000
Model NO.: B218
Cutter Material: High-Speed Steel
Finished Surface: Outer Surface Process
Compressive Strength (For Crushing): >300MPA
Tongs′ Features: Adjustable Tongs
Weight: 2.6
Trademark: Kingoro
Transport Package: Wooden Case
Specification: 2640x1240x1420
Origin: China
HS Code: 84793000