Box Type Scroll Compressor Air Cooled Industrial Chiller

Model NO.: HLLA~15SI
Application Fields: Chemical
Application Machine: Coordinate Boring
Certification: CE
Condition: New
Cooling Capacity: 9.2kw-142.2kw
Refrigerant: R22, R407c
Power Supply: 380V-3-pH-50Hz
Evaporator: Shell and Tube Type
Function: Cooling
Cooling Range: 20~40 Degree
Chilled Water Flow: 26.4~408.3L/M
Dimension: 3200*1180*2200
Weight: 130~1280kg
Trademark: Golden
Specification: CE
Origin: Dongguan, Guangdong
HS Code: 8418692090
Box Type Scroll Compressor Air Cooled Industrial Chiller



1. The chiller adopt high-quality compressor and Italy pump, so it is very sate and noiseless, economical in power and durable
2. The chiller is deployed with Italy temperature controller, it can control the temperature between 3 and 35 degrees exactly
3. The designs of chiller and radiator are unique, so the heat exchange efficiency is very high
4. The chiller is designed to be with current over-load protector, high voltage and low voltage construction and electric time-delay safeguard, when malfunction happened, it could alarm and show the cause of the problem in time.
5. It has stainless steel temperature-holder box, it is very convince to purify
6. It is designed to be with anti-phase & lack-phase protector and anti-icy protector
7. The temperature of ultra cod chiller can be below -15 degrees.
8. This series chiller can customize base on the requirement of acid resistant & acidity-resistant
9. It has got CE certification.
                                                                                Industrial Air Cooled Chiller
  Model  HLLA ~ 03SI 05SI 08SI 10SI 12.5SI 15SI 20DI 25DI 30DI 40TI 45TI
Rated Cooling Capacity ×1000 kcal/h 7.9 12.8 20.8 27.9 32.3 40.8 55.7 64.7 81.5 97.0 122.3
KW 9.2 14.9 24.2 32.4 37.6 47.4 64.8 75.2 94.8 112.8 142.2
Input Power (KW) 3.85 5.55 8.15 10.4 12.0 16.0 20.1 22.5 31.2 33.7 45.7
Comp. Input Power×Qty.  (KW) 2.6 4.3 6.35 8.1 9.3 12.5 8.1×2 9.3×2 12.5×2 9.3×3 12.5×3
 Chillded Water Pump Model HT1.0DK-20 HT1.0DK-20 HT40-15 HT40-15 HT50-17 HT50-17 HT50-17 HT50-17 HT65-19 HT65-19 HT65-19
 Chilled Water Pump Power  (KW) 0.75 0.75 1.1 1.1 1.5 1.5 1.5 1.5 2.2 2.2 2.2
 Comp. Current (A) 6.8 10.5 14 17.5 20 25.6 33.8 37.2 49.8 55.8 72.6
Power Supply 3φ-380V-50HZ
 Safety Protection Phase reversion protection, Phase lack protection, Overload current protection,
Discharge air temp.  protection, Low & High pressure protection, Low temp.  protection, Water flow protection,
 Number of Refrigeration Circuit 1 2 3
 Capacity Control (%) 0, 100 0, 50, 100 0, 33, 66, 100
 Refrigerant R22
 Condenser Ripple Aluminum Fins around Cooper Pipe
 Power lnput of Fan (KW) 0.5 0.5 0.7 1.2 1.2 2.0 2.4 2.4 4.0 3.6 6.0
 Evaporator Pipe Coil Type  Shell and Tube Type
 Water Side Max Pressure (MPa) - 1
 Dia.of Pipe to Evaporator (inch) 1" 1-1/2" 2" 2-1/2"
 Chilled Water Flow (L/m) 26.4 42.7 69.4 92.9 107.8 135.9 172.0 194.8 272.2 292.2 408.3
 Evaporator Water Pressure drop (kPa) - 17 23 28 30 28 28 32 32 31
 Running Noise dB(A) 72 72 73 75 75 75 75 75 75 75 75
 Tank Volume (L) 80 80 180 180 180 180 270 270 270 270 270
 Total weight (Kg) 130 170 430 480 510 560 840 880 980 1130 1280
 Dimension L×W×H 1000×650×1500 1500×1100×2200 1500×1180×2200 2200×1180×2200 3200×1180×2200

PVC Edge Banding For Furniture

The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.

The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.

Furniture edge banding is a material for protecting, decorating and beautifying the section of furniture panels. It can make a piece of furniture show the overall effect of clear wood grain and colorful.

PVC furniture edge banding is relatively light, which is relative to metal and plexiglass. The reason for the lightness is not because it is a polymer compound, but because they are organic compounds, which are composed of carbon, hydrogen, oxygen, and chlorine. And other lighter elements.
The material of pvc furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressurizing, and maintains its original shape after the temperature drops or the pressure disappears. It can be processed into edge bands of their respective shapes by extrusion and other methods, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shapes, and so on.
pvc furniture edge banding is of high quality and low price, and the price of plastic is far less than that of metal.

PVC Edge Banding For Furniture,Pvc Edge Banding For Furniture, Edge Banding For Furniture,Pvc Edge Banding Tape

Henan Shunbang Chemical Industry CO.,Ltd , https://www.suspensionpvc.com