SZL series chain grate boiler Biomass Steam Boiler,Industrial Biomass Steam Boiler,Chain Grate Biomass Boiler,Chain Grate Biomass Steam Boiler,Automatic Biomass Boiler Henan Yuanda Boiler Co., Ltd. , https://www.hnyuandaboiler.com
Our company SZL type boiler is a double-drum water tube assembly chain grate boiler. The boiler proper has an upper drum and a bottom drum longitudinally arranged along the boiler center. The front of the upper drum and two sides water wall tubes constitute the boiler hearth radiation heating surface, and the tubes between the rear of the upper drum and the bottom drum constitute the convection heating surface. The economizer is arranged on the rear of the boiler,part of heat from high temperature exhaust gas generated by burning was absorbed by economizer, then the exhaust gas go through the cooling chamber,exhaust gas enters the convection heating surface to transfer heat power again, and through economizer,dust collector, finally draught by ID fan to Chimney,discharges into the atmosphere.
Core Technology:
1. Longitudinally arranged double drum
2. Airtight and uniform-pressure wind room
3. Customized combustion device
4. "α" type flame combustion
5. High quality aluminum silicate insulation
6. Built-in dust cleaning
7. Easy operation control system
Butterfly valve structure principle and applicable analysis
Butterfly valve structure principle and applicable analysis
Butterfly valve (also called flap valve) is a kind of regulating valve whose closing part is circular disc or disc, which is mainly composed of valve body, valve stem, butterfly plate and sealing ring. The valve body is cylindrical, with a short axial length and a built-in butterfly plate. The butterfly plate of the butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical passage of the valve body of the butterfly valve, the disc-shaped butterfly plate rotates around the axis, and the rotation angle is between 0 ° and 90 °. When it is rotated to 90 °, the valve is fully opened.
The butterfly valve has a simple structure, small volume and light weight, and is composed of only a few parts. And only need to rotate 90 ° to quickly open and close, simple operation, and the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the thickness of the butterfly plate is the single resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very small, so it has good flow control characteristics. There are two types of butterfly valve: elastic seal and metal seal. Elastic sealing valve, the sealing ring can be embedded on the valve body or attached to the periphery of the butterfly plate.
Butterfly valves with metal seals generally have a longer life than those with elastic seals, but it is difficult to achieve complete sealing. The metal seal butterfly valve can adapt to higher working temperature, and the elastic seal butterfly valve has the defect of being limited by temperature.
If the butterfly valve is required to be used as a flow control, the main thing is to choose the valve size and type correctly. The structural principle of the butterfly valve is especially suitable for making large-diameter valves. Butterfly valves are not only widely used in general industries such as petroleum, gas, chemical, and water treatment, but also in cooling water systems of thermal power stations.
Commonly used butterfly valves are wafer-type butterfly valves and flanged butterfly valves. Wafer type butterfly valve is to connect the valve between the two pipeline flanges with double-headed bolts. Flange type butterfly valve is to have a flange on the valve, and use bolts to connect the two ends of the valve to the pipeline flange.