Mineral Processing Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, chemical and general industry applications. It is including Centrifugal Mineral Processing Slurry Pump, Heavy Duty Mineral Processing Slurry Pump and Horizontal Mineral Processing Slurry Pump. They are designed for heavy duty applications such as mill discharge, power sector and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density slurry.
Product Features:
-Wear resistant metal or rubber wet end parts, long service life
Application Range:
Size: 25 mm to 450 mm
Maximum Heads: up to 75 m
Product Features:
-Wear resistant metal or rubber wet end parts, long service life
Application Range:
Size: 25 mm to 450 mm
Maximum Heads: up to 75 m
Mineral Processing Slurry Pump Rocessing Slurry Pump,Mineral Processing Slurry Pump,Horizontal Mineral Slurry Pump,Horizontal Mineral Processing Pump SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com
(1) Throttle valve: After setting the orifice area, the movement speed of the actuator that can make the load pressure change little and the movement uniformity is not high is basically kept stable.
(2) Speed ​​control valve: It can maintain the differential pressure at the inlet and outlet of the throttle valve when the load pressure changes. In this way, after the throttle orifice area is set, regardless of how the load pressure changes, the speed control valve can maintain the flow through the throttle valve unchanged, so that the actuator movement speed is stable.
(3) Diverter valve: Regardless of the size of the load, the equivalent flow can be equal to the two actuators of the same oil source. It is a proportional diverter valve or a synchronous valve;
(4) Collector valve: In contrast to the diverter valve, the flow to the manifold is proportionally distributed.
(5) Shunt manifold: It has two functions, diverter valve and manifold valve. 
-Wide options for Impeller
-Various types of pump seals to suit different working condition
-Grease or oil lubrication
-Discharge branch can be positioned at intervals of 45 degree
-Can be installed in multistage series
-Easy to maintain
Capacity: up to 5000 m3/hr
-Wide options for impeller
-Various types of pump seals to suit different working condition
-Grease or oil lubrication
-Discharge branch can be positioned at intervals of 45 degree
-Can be installed in multistage series
-Easy to maintain
Capacity: up to 5000 m3/hr
Classification of flow control valves
The flow rate is adjusted by adjusting the area of ​​the orifice between the valve plug and the valve body and the local resistance generated by it to control the movement speed of the actuator. Flow control valves are divided into five types according to their use.