Hand-held pressure pump is a gas-type hand-held pressure pump for industrial applications in the field of pressure measurement instruments installed in the control room and control the use of various types of pressure gauges, but also for the school to provide pressure pump, the range of -80kpa- Within 4.0mpa various types of pressure transmitters, pressure sensors and various types of pressure instruments can be used to check the pressure hand pump. Hand-held pressure pump for portable, light weight, wide operating temperature, light pressure, easy to use. Hand-held pressure pump medium for the air, suitable for pressure range of -80kPa ~ 4.0MPa, the use of temperature between -20 ~ 50 ℃, pressure pump products compact, easy to carry and use, and has a good air tightness And longer service life. Hand-held pressure pump first tighten the deflation valve, the pressure output were connected with the nozzle (the nozzle has the original wife), one screwed into the standard instrument, the other end connected to the test instrument. When measuring positive pressure, the unillustrated interface live is connected to the interface marked with "+". The manual piston rod is added with positive pressure beyond 20% of the measuring point and stable for 2 ~ 3 minutes to fine tune the measuring point. When measuring the negative pressure, Unillustrated interface live connected to the interface labeled "-", manual piston rod, adding negative pressure to beyond the measuring point of 20%, stable 2 to 3 minutes, fine-tuning to the measuring point. Metal 3D Printing - Slm / Dmls Metal 3D Printing - Slm / Dmls,3d Printing Service Metal ,Metal 3d Printing Service Stainless Steel,3d Printing Service Metal Aluminum Ningbo Rongna Technology Co.,Ltd , https://www.prototyping-machining.com
METAL 3D Printing - SLM / DMLS
The two technologies have many similarities: both use laser scanning and selectively fuse (or melt) metal powder particles, glue them together and build them layer by layer. Similarly, the materials used in both processes are granular metals.
The difference between SLM and DMLS is due to the basis (and patents) of the particle bonding process: SLM uses metal powder with a single melting temperature and completely melts the particles, while in DMLS, the powder is composed of materials with variable melting points at high temperatures Fusion at the molecular level.
Bering 3D provides 3D printing services for various metal materials such as stainless steel, die steel, titanium alloy, aluminum alloy, and bronze.
Handheld pressure pump operation details
ã€Print】 ã€Close】