How to install and maintain the security inspection machine?

Posted on

The power supply of the security equipment must be well grounded. To prevent leakage, connect the leakage protector before connecting the power supply. And X-ray security inspection machine installation environment should be dry and ventilated, if the environment should be wet and waterproof measures to extend the life of the machine.
Any commissioning and maintenance of the security inspection machine must be performed by professional and technical personnel. It is not allowed to modify or add any accessories without permission.
Security inspection machine operation
Before the system is powered on, the lead curtain used to prevent X-ray leakage at the entrance and exit of the channel must be inspected. If it is damaged, it must be replaced immediately.
Before use, check whether the housing panel, display, keyboard, and cables of the equipment are damaged, and whether the machine is placed in a stable manner, and then check whether the drum runs smoothly.
Check if the conveyor belt is in good condition and the machine's LCD screen is forbidden from scratching or hitting with sharp hard objects.
Do not stand or sit on the conveyor while the belt is running. Do not touch the edges of the belt and the rollers on both sides with your hand. When the conveyor belt does not go or stops when it is traveling, it is necessary to immediately check whether the drum and the conveyor belt have slipped or stuck. Otherwise, the drum motor will be burned.
When the X-ray lamp is on, no part of the body can enter the examination room.
When the environmental temperature of the security inspection machine is lower than 5 degrees Celsius, it should be warmed up 30 minutes in advance. Before the baggage passes through, the water stains and ice cubes on the baggage shall be cleared.

Our main product for Finned Tube Coil Fabricaiton machinery includes:

Fin Lines, Fin Dies , Haripin Bender, Hand feeding Hairpin Bender , Vertical Expander , Portable Expander , Tube Cutoff Machines, Return Bender , Return Elbow Bender , Return Crossover Bender, Snake Shape Bending Machine, Manifold Drilling Machine , Size and Ring Machine, Return Bender Cleaning Machine and Brazing Machine By appling above machinery and tools, you can make various finned tubing coil for both common and customized.

Except them,the Servo Tubing Cutoff Machine is also my company' product,it is used to straighten pipes from the coiler and cut them in a certain length.This machine is mainly used for  tube coil decoiler, then straighten and cut automatically to its determined length. After cutting, the tube will fall into the support automatically.

In order to fabricate good quality products as well as make sure quick lead time, we have a modern workshop with advanced and precision machining equipments. We pride ourselves on providing fast response to all our customer`s requests and provide after sale service, maintenance, repair, training and spare parts.

Finned Tube Coil Fabrication Machinery

Mechanical Vertical Expander, Hairpin Bender, Return Bender,Servo Tubing Cutoff Machine

Satis Products Co., Ltd. , https://www.satismachinery.com