How to store the mineral processing equipment that has not been used for a long time, in order to avoid the problems in the process of storage of the mineral processing equipment? In the process of long-term storage, the mineral processing equipment should pay attention to several aspects, so that the mineral processing equipment can always be in the best state. When the mineral processing equipment is used, it can be used in the normal production process as soon as possible. 1. The mineral processing equipment not used for a long time should be stored in a dry room to prevent the concentrating equipment from rusting in a humid environment. 2. The beneficiation equipment containing the battery should be stored in the dry and antifreeze. Lay the floor on a flat floor and do not place conductive objects on the sides of the battery. Lead-acid batteries should be charged once a month, to ensure clean and dry their appearance. 3. The ore dressing equipment should place the mechanical fuel control rod in the idle position. If conditions permit, preservatives should be added to make a new oil film appear in the lubrication parts of each part. Before storing, will not corrupt the metal parts of the engine, fuel tank fill diesel. 4. Apply butter to the exposed parts of the metal of the beneficiation equipment to prevent rust. 5. After parking the mineral processing equipment, cover it with a cover cloth. To prevent the fuel tank from rusting. Place it indoors as much as possible, and if it has to be placed outdoors, regular maintenance and maintenance of the machine is required. Hot Melt Adhesive For Plastic Straw First of all, straw hot melt adhesive is a kind of hot melt adhesive strip or particle, which is heated and melted by hot melt adhesive gun and sprayed or smeated on the surface of the object that needs to be bonded, waiting for the melt adhesive to cool and solidify to form a stable bond. The color and hardness of hot melt adhesive are different, and different types of hot melt adhesive can be selected according to your needs. Hot Melt Adhesive For Plastic Straw,Food Hot Melt Adhesive,Food Straws Hot Melt Adhesive,Straws Hot Melt Adhesive Shenzhen Tongde New Materials Technology Co., Ltd. , https://www.tdhotmeltglue.com
Then, the use of straw hot melt adhesive need to pay attention to some matters. First of all, you need to select the appropriate hot melt Glue Gun and hot melt glue strips or particles to ensure that they are suitable for the surface of the object that needs to be glued. Secondly, it is necessary to pay attention to the temperature and flow rate of hot melt adhesive, too high or too low temperature and flow rate will affect the bonding effect of hot melt adhesive. In addition, it is necessary to pay attention to the use environment and shelf life of hot melt adhesives to avoid affecting the quality and effect of hot melt adhesives.
Third, straw hot melt adhesive has a variety of advantages. Pipette hot melt adhesive has fast, efficient and stable bonding effect, which can achieve high quality sealing and fixing. At the same time, the straw hot melt adhesive has good water resistance, corrosion resistance, high temperature resistance and other properties, can be applied to a variety of environments and occasions. In addition, the straw hot melt adhesive also has the characteristics of simple operation, no pollution, economic and practical, which has brought a lot of convenience and advantages for production and manufacturing.
In addition, straw hot melt adhesive can also be used in a variety of fields and materials bonding and sealing. Straw hot melt adhesive can be used for bonding and sealing of paper, plastic, metal, ceramics and other materials, and can be applied to packaging, manufacturing, construction and other fields, with a wide range of application scenarios and market demand.
In short, straw hot melt adhesive is a fast, efficient, stable and other advantages of industrial hot melt adhesive, with a wide range of application scenarios and market demand. When using straw hot melt adhesive, it is necessary to pay attention to the selection of hot melt adhesive, the control of temperature and flow rate, so as to avoid affecting the quality and effect of hot melt adhesive.
How to store mineral processing equipment that has not been used for a long time
A complete beneficiation production line Equipment contains a large number of ore dressing equipment. In the daily life process, not all of the mineral processing equipment should be put into the production of the beneficiation production line. These unused beneficiation equipment are to be stored for better production in the future.