(1) Wet weak magnetic field permanent Magnet barrel magnetic separator This magnetic separator is mainly used for sorting ferromagnetic materials. (2) Electromagnetic magnetic pulley The device consists of a multi-pole magnetic system with alternating polarity or a single polarity along the direction of material travel. The magnetic induction intensity of the electromagnetic magnetic pulley can reach 0.1~0.15T, and the ore size is 10~100mm. The size of the pulley is ¢×L (600 to 1000)×(1700 to 2400) mm. It has the same effect and the permanent magnetic pulley beneficiation plant. (3) Permanent magnetic cylinder magnetic separator Equipment structure: Its main part consists of a drum and a magnetic system. Magnetic system and a magnetic field characteristics: magnetic strontium ferrite-based applications: mineral fine ferromagnetic particles dry separation, purification magnetic material, powdered magnetic material to exclude impurities. (4) Wet weak magnetic separator The equipment consists of three main parts: cylinder, magnetic system and tank. (5) Superconducting high gradient magnetic separator Equipment structure: The periodic superconducting high gradient magnetic separator is a superconducting magnetic filter. The main parts are superconducting coils, refrigeration mechanisms, sorting mechanisms, ore feeding institutions. The superconducting magnetic device can be used as: 1) Laboratory equipment for basic research of magnetic separation processes; 2) for the intermediate test of simulating the operating conditions of large installations; 3) For small-scale production.
This kind of Stator Powder Coating Machine can meet the requirement of
different stator dimension. It makes the whole powder coating process far more iconvinient than by manual. This machine can also be
connected to Stator Production Line to meet the mass production
requirement.
Therer are two different powder method, one is for stator coil, the other is for the stator slot. The powder coating process is very sample by machine. Firstly, operator
load stator on the fixture. Then press start button. Machine will do
the rest process, including powderiing, blowing, powder recycling and
ect. The powder time and material is as per customer's requirement.
Stator Powder Coating Machine Stator Powder Coating Machine,Stator Coil Powder Coating Machine,Commutator Motor Powder Coating Machine Ningbo Nide Mechanical Equipment Co., Ltd. , http://www.nide-auto.com