1.0-1.8 Ton LPG&Gasoline Forklift is one kind of Internal Combustion Forklift,the power is LPG or both.LPG & Gasoline combustion fully, improve the life of engine three times.It`s more clean than diesel forklift,and can work longer than Electric Forklift.
General
Model
FY10
FY15
FY18
Power Type
LPG&Gasoline
LPG&Gasoline
LPG&Gasoline
Load Capacity
kg
1000
1500
1800
Load centre
mm
500
500
500
Tyre
Pneumatic Tyre
Pneumatic Tyre
Pneumatic Tyre
Front Tyre
6.50-10-12PR
6.50-10-12PR
6.50-10-12PR
Rear Tyre
5.00-8-10PR
5.00-8-10PR
5.00-8-10PR
Overall Dimension
Lift Height
mm
3000
3000
3000
Fork Size
L×W×T
mm
920*120*35
920*120*35
920*120*35
Mast Tilt Angle
F/R
.
6/12
6/12
6/12
Mast Lowered Height
mm
1995
1995
1995
Mast Extended Height(with backrest)
mm
3940
3940
3940
Length to face of fork(Without fork)
mm
2205
2285
2285
Overall Width
mm
1086
1086
1086
Overhead Guard Height
mm
2040
2040
2040
Application Area:
1.Warehouse
2.Port
3.Factory
4.Distribution Center
5.Logistics
If you have any other questions,please contact us directly.Our forklift are all with high quality,and you can choose any other engine to equip.It can be produced according to your idea.And we invite you to visit our factory.
1.0-1.8Ton LPG&Gasoline Forklift 1.5 Ton LPG&Gasoline Forklift,Clean Fuel Forklift,Dual Fuel Forklift Truck,Dual Fuel Forklift ZHEJIANG GOODSENSE FORKLIFT CO.,LTD , https://www.goodsenseforklift.com
In iron-bearing manganese oxide ore, the iron mineral is mainly limonite. Iron and manganese are difficult to separate by re-election, flotation or strong magnetic separation, and a reduction roasting magnetic separation method is required. A washing-reduction roasting magnetic separation-re-election process has been employed in the industry.
Manganese oxide beneficiation test plan selection
Manganese oxide, manganese ore was mainly hard manganese ore, manganese ore and water, manganese ore, gangue minerals mainly silicates, but also carbonate minerals, frequently with iron, phosphorus, and nickel, cobalt and other ingredients. The ore dressing method of manganese oxide ore is mainly based on re-election. Weathered manganese oxide ore often contains a large amount of slime and fine ore, and the washing and re-election method is adopted in production. The ore mine is washed ore to remove the net minerals obtained from the slime, and some can be used as finished ore, and some need to be selected by jigging and shaker. Washing overflows sometimes require further recovery by re-election or strong magnetic separation. Some deposits of primary manganese oxide ore, due to the depletion of mining, the use of heavy medium and jigging to remove the gangue to obtain a massive concentrate.