Cleaning robots, also known as automatic cleaners, smart vacuum cleaners, Robot Vacuum Cleaners, etc., are a kind of smart household appliances that can automatically complete the floor cleaning work in the room with certain artificial intelligence. Generally, brushing and vacuuming are used to absorb the debris on the ground into its own garbage storage box, so as to complete the function of ground cleaning. Generally speaking, robots that complete cleaning, vacuuming, and wiping are also classified as sweeping robots.
Our company will provide OEM service with a complete set of OEM solutions of robot vacuum and vacuum cleaner.
Including software and hardware design, supply chain, packaging, and a series of after-sales services.
Oem Robot Vacuum Cleaners,Wireless Vacuum Cleaner,Portable Vacuum Cleaners,Vacuum Rotator Cleaner Guangxi Nanning King Green Smart Co., Ltd. , https://www.kinggreensmart.com
as follows:
The detection steps generally include the following five points:
First, confirm whether the power cord of the high and low temperature aging test box is properly installed and properly grounded according to the specifications.
Second, to confirm whether the high and low temperature aging test chamber water is enough and the cover of the water tank is properly covered and cleaned?
Third, confirm the high and low temperature aging test box wet ball gauze:
aã€Whether the wet ball special gauze is placed in the correct position? (Is it placed in front of the humidity sensor?)
b. Is it wet? (Water is provided in the water tank. If the water level is normal, the gauze cannot be wetted. Please change the new gauze immediately. Change the gauze every three months.)
c. Is the water tank normal?
Fourth, confirm the high and low temperature aging test box humidifier working conditions:
a, humidifier water level is normal? (Check the water level 3 to 5 minutes after the humidifier has supplied water)
b. Is the water used during the humidification period clean? (Humidifier should be drained regularly to keep the inside clean)
c. Is the drain properly installed?
Fifth, high and low temperature aging test box Check wet bulb over temperature protection switch is set at 150 °C.
Note: The gauze should be removed only when the temperature test is done. If the gauze is operated at a high temperature above 85°C, the gauze should be replaced before the next run.
Precautions before and after work on high and low temperature aging test boxes
Dongguan Kewen Testing Equipment Co., Ltd. is a manufacturer of environmental testing equipment for R&D, production, and sales. The company has a strict management system. Every equipment must be strictly debugged and inspected before shipment to ensure smooth access to customers' locations. . The high and low temperature aging test chamber has a large volume. Therefore, the customer must pay attention to the following matters before starting the work each time, so as to upgrade or facilitate other operations during the subsequent use.