One of our laser customers from Wuhan purchased S&A CW-5000 water chiller to cool their Huaray 3W UV laser marking machine.
CONTACT S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
Email:
Website: http://
Tactical Bipod,Tactical Adjustable Bipod,Tactical Rifle Bipods,Tactical Shotgun Bipod Shenzhen Haochenyu Trading Co., Ltd. , https://www.outdoorshootings.com
S&A CW-5000 water chiller is applicable to all of the 3W-5W UV laser marking
machines with up to 800W cooling capacity and ±0.3℃ precisely
temperature control.
As UV laser has a high requirement on constant temperature, some of the
users request the installation of heating rod in the water chiller.
The provision of a heating rod may facilitate the industrial water
chiller to achieve a constant temperature. Especially in the northern
cold region, the cooling water freezes easily and the water temperature
is extremely low, which might lead to a failure in starting the water
chiller. Therefore the installation of a heating rod will play an
extremely important role. According to our experience in water chiller,
the constant temperature required by Huaray laser is 25℃.
When will the heating rod start to work after the installation? It
starts to work when the temperature of the cooling water is 0.1℃ lower
than the preset temperature. For example: In the constant temperature
mode, set the temperature to be 25℃. Then the heating rod starts to work
when the water temperature is 24.9℃. In the intelligent mode, when the
temperature is set to be 28℃ (or when the ambient temperature is 30℃),
the heating rod begins to work when the water temperature reaches
27.9℃.
As the center of an industrial water chiller, the quality of condenser
is of great importance. S&A has invested millions of money in the
condenser production equipment and made strict control on a series of
processes, including fins, bends and welding etc. to secure the quality
of condenser. Also with the introduction of welding robots, the welding
procedure has been significantly improved and perfected, which has
efficiently prevented the machinery breakdown caused by solder skips to
better secure the stable quality of S&A water chiller.
The technical parameter of CW-5000: http://Products/ChillerCW5000800Wcoo.html