Textile Machinery Reduces Employment Trends in Energy-saving and Efficient Ways

Recently, a number of new products emerged at the ITMA 2011 International Textile Machinery Exhibition held in Barcelona, ​​Spain. These products concentrated on the features of high speed, high efficiency, energy saving, and reduced employment. This year's ITMA 2011 International Textile Machinery Exhibition held in Barcelona, ​​Spain covered all aspects of the textile machinery equipment, equipment and other supporting services industry, more emphasis on technological innovation and the promotion of new technologies, representing the highest level of the current international textile machinery manufacturing industry And development direction.

The level of intelligence has increased dramatically. ITMA 2011 International Textile Machinery Exhibition in Barcelona, ​​Spain has a total of 7 pavilions, including 4 exhibition halls for dyeing and finishing equipment, occupying half of the entire exhibition, and 2 exhibition halls displaying spinning machines. There is also a pavilion exhibiting weaving equipment, including knitting and woven machines. There were more non-woven fabrics and quilting equipment throughout the exhibition, and the physical exhibition occupied a lot of space and became a bright spot for this exhibition.

High-speed, high-efficiency, energy-saving, and reduced labor consumption are the salient features of all exhibited equipment. It can be seen that the automation and intelligent on-line control technologies for the machine parts manufacturing technology, electronic digital control technology, and the production process of physical products at various booths have been greatly improved. For example, the speed of a new generation of rotor spinning equipment introduced by Oerlikon, Switzerland, reaches 200,000 rpm; the maximum speed of air-jet looms exhibited by Belgian Picanol at the site can reach 2013 rpm; intelligent matching with high speeds The electrical settings make the operation more simple and safe, and the machine parts of the equipment are more precise and more rigorous from casting processing to grinding and installation.

The spinning machines that exhibited the most energy-saving and efficient spinning equipment were rotor spinning, compact spinning, and fancy yarn spinning. Among them, Switzerland Oerlikon’s rotor spinning had greater technological breakthroughs, and Spain’s Mazuri and Japan’s Murata jointly The physical display of production lines occupies a large space, and the unconventional nature of these products is that it maximally saves production land, saves labor costs, improves online monitoring and facilitates production management.

The cover carding machine introduced by Trützschler in Germany shows its exquisite mechanical manufacturing technology and its beautiful appearance in a transparent manner: it raises the cylinder, makes the combing rod more compact, and the clothing cloth is magnetic. The inlaid type facilitates installation and replacement, avoiding damage to the edge of the clothing by the card-type installation. The company also introduced an auto-leveler on the first-stage draw frame with patented technology to achieve the entire course of the sliver. The French NSC company only exhibited a wool combing machine. Its main focus was on the display of non-woven machinery.

The woven section is most prominent with Belgium Picanol's rapier looms and Japan's Toyota Air Jet Weaving Machine JAT 710 series. The warp knitting machines exhibited in the knitwear exhibition area particularly attracted the attention of the audience; computerized flat knitting machine exhibitors mainly include the Chinese company Cixing Co., Ltd., Shaoxing Jinyu Machinery Manufacturing Co., Ltd., and Japan Shima Seiki Co., Ltd., and Germany's STOLL Co., Ltd. Among them, the exhibition booth of STOLL in Germany is much larger than that exhibited at the 15th Shanghai International Textile Industry Exhibition held in China in June this year. The company not only exhibited the oldest small weaving machine in STOLL's growth history at the booth. Hand-rolling flat knitting machines and engraving jacquard machines are used to review the development history of flat knitting machines to prove their supremacy, and also exhibited 11 latest computerized flat knitting machines with different functions, and the products are not limited to knitted garments. Specially set up industrial products exhibition stands, these products are mainly used for medical protective equipment, body armor reinforcement, industrial filters and so on. At the same time, the company also demonstrated STOLL's mesh weaving technology for industrial fibers such as super-strength fibers, glass fibers, and metal wire mesh. These technologies have never been exhibited at domestic exhibitions and are the leading technology for knitting in flat knitting machines.

Various kinds of dyeing and finishing equipments, digital printing and Taiwanese printing have obviously become the development direction, which confirms that energy saving and emission reduction is always the pursuit of the printing and dyeing industry. It can be seen that the new dyeing machine exhibited at the ITMA 2011 International Textile Machinery Exhibition in Barcelona, ​​Spain, pays more attention to the adaptability of many varieties. It can achieve one machine by using interchangeable dyeing creel, that is, one dyeing machine can perform fiber dyeing. The dyeing of the tops can also be used for cheese dyeing, dyeing of string-like products, dyeing of warp yarns and warp yarns, and dyeing of half-capacity, part-capacity and full-capacity under a condition of stable bath ratio.

Both gaps and advantages The main purpose of the domestic machinery manufacturers participating in the exhibition was to participate in international competition and increase their international reputation. China Hengtian Group Co., Ltd., Shanghai Pacific Electromechanical Co., Ltd., Hangzhou Honghua Digital Technology Co., Ltd., Ningbo Ci The companies such as Star Co., Ltd. not only set up larger booths for physical exhibitions to attract domestic and foreign visitors, but also organized exhibition pavilions, visiting groups, and technical groups to learn all-round advanced textile machinery manufacturing techniques and learn exhibition experience. However, due to the fact that most of the domestic exhibitors do not have physical exhibits, they generally feel less effective.

The domestic pavilion has also received a lot of gains. It has experienced the development direction of the textile machinery industry and the latest trends in the technology, and has found gaps and competitive advantages. Some companies also plan to display their skills at the next international exhibition; some companies have prepared Come and discuss the technical cooperation intentions. The exhibition also set up a special association area, mainly textile associations and textile-related organizations from all over the world. For example, the Australian Wool Development Corporation also set up booths and introduced them to visitors in the form of new product services. Domestic related organizations headed by China Textile Machinery and Equipment Industry Association also set up booths.

At the ITMA 2011 International Textile Machinery Exhibition in Barcelona, ​​Spain, there are few woolen machinery and there are not many innovations. Most of the companies that specialize in wool spinning equipment have been integrated. Their business is mainly to renovate and renovate used equipment. Through the exhibition, I deeply felt that the attention rate of woolen textile equipment has been gradually reduced, and wool spinning equipment can draw on and learn from the advanced technologies of other industries. The development space of woolen textile equipment still exists, and the equipment is selected practically. Personalized innovation and innovation also require wool textile companies and wool textile machinery manufacturers to complete together.