What should be paid attention to during the operation of double-head milling machine

Problems to be aware of during double-head milling operation:

1. The operator must stick to the post, carefully operate, and do not do anything unrelated to work. Stop when you leave the machine and turn off the power and air supply.

2. Processing according to the process regulations. It is not allowed to increase the amount of feed, the amount of grinding and the cutting speed. It is not allowed to use the machine tool for over-standard, overload and overweight. It is not allowed to use coarse machine and large machine.

3. The tool and workpiece should be correctly clamped and fastened. Do not touch the machine when loading or unloading. Find a positive tool and the workpiece is not allowed to hit with a heavy hammer. It is not allowed to tighten the tool and workpiece by increasing the torque by lengthening the handle.

4. Do not install thimbles, knives, knife sleeves, etc. in the taper hole of the double-head milling machine, the taper hole of the tailstock sleeve and other tool mounting holes, which are inconsistent with the taper or the hole diameter, the surface is notched and not clean.

5. The mechanical shifting of the double-head milling machine drive and feed mechanism, the clamping and adjustment of the tool and the workpiece, and the manual measurement between the workpieces should be stopped at the cutting and grinding, and the tool and the grinding tool should be stopped after leaving the workpiece. get on.

6. The sharpness of the tool and the grinding tool should be kept. If it becomes dull or cracked, it should be sharpened or replaced in time.

7. In the cutting and grinding of double-head milling machines, the cutters and grinding tools do not leave the workpiece and are not allowed to stop.

8. It is not allowed to dismantle the safety protection device on the machine tool. The machine tool lacking the safety protection device is not allowed to work.

9, the hydraulic system in addition to throttling and other hydraulic cutting is not allowed to adjust privately.

10. On the machine tool, especially the rail surface and the work surface, it is not allowed to directly place tools, workpieces and other debris.

2 ton sitting on electric reach truck

Zowell FRB20 model sitting on Electric Reach Truck is standard with side shift function. It is an industrial material handling equipment, which refers to the forward moving wheel type vehicle which carries out loading and unloading, stacking and short distance transportation of the good by pallets.

There are also many options like camera and monitor, EPS function, AGV modification, height preselection function etc. The sitting on electric reach truck is a high performance truck with perfect performance and excellent safety.

What's more, it is equipped with intelligent system, American Curtis controller system, double AC system ensure its flexible operation in the big warehouse.

Detail features


1. Wider area for the leg
The legroom of the operating position is ample, allowing the operator to move flexibly. They will feel comfortable without worrying about being cramped.

2. Sitting type operation
The seat is adjustable. The soft seat can relieve fatigue and provide a safe and comfortable driving experience for operators.

3. Design of low center of gravity
The design of low center of gravity can ensure stability of the truck so that it is anti-overturning even in complex working conditions.

4. height-limited lifting

5. Turning speed limiting device
The precise high speed limiting turning control technology can prevent side overturning, thus protecting the goods from dropping.

6. Good lifting ability
The max lifting height is 9000mm which can meet the requirements of goods stacking in certain height.

7. Front moving function
The fork can move forward for 590cm,which can reduce turning radius of the truck as well as ensure running stability.

8. Small turning radius

This reach truck has a small turning radius which is only 1700mm. It can move flexibly even in very tight warehouse and workshop areas.

9. Tilt forward and backward

The fork can tilt forward and backward for easy loading and unloading of goods and material, thus improving the transporting stability of the reach truck.

10. Forged fork
The width of the fork can be adjusted within the range of 200-760mm. It is suitable for working conditions with both single side pallets and double side pallets.


Reach Truck,Reach Truck Forklift,Electric sitting on Forklift,Hyster reach truck

Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com