Model Power Flow Head Velocity Pipe size kw m3/h m V Inch QY10-34-2.2 2.2 10 34 380 1.5 QY15-26-2.2 2.2 15 26 2 QY25-17-2.2 2.2 25 17 2.5 QY40-12-2.2 2.2 40 12 3 QY65-7-2.2 2.2 65 7 4 QY100-4-2.2 2.2 100 4 6 QY15-36-3 3 15 36 2 QY25-26-3 3 25 26 2.5 QY40-16-3 3 40 16 3 QY65-10-3 3 65 10 4 QY100-7-3 3 100 7 6 QY12.5-50-4 4 12.5 50 2 QY25-32-4 4 25 32 2.5 QY40-21-4 4 40 21 3 QY65-14-4 4 65 14 4 QY100-9-4 4 100 9 6 QY200-4.5-4 4 200 4.5 6 QY260-4-4 4 260 4 8 QY15-55-5.5 4 15 55 2 QY25-40-5.5 4 25 40 2.5 QY40-28-5.5 5.5 40 28 3 QY65-18-5.5 5.5 65 18 4 QY100-12-5.5 5.5 100 12 6 QY250-5-5.5 5.5 250 5 8 QY20-55-7.5 7.5 20 55 2 QY25-50-7.5 7.5 25 50 2.5 QY40-38-7.5 7.5 40 38 3 QY100-17-7.5 7.5 100 17 4 QY160-11-7.5 7.5 160 11 6 QY250-7-7.5 7.5 250 7 8 QY40-58/2-11 11 40 58 3 QY65-46/2-11 11 65 46 4 QY100-25/2-11 11 100 25 6 QY300-10-11 11 300 10 6 QY400-7.5-11 11 400 7.5 8 QY40-87/3-15 15 40 87 3 QY65-62/3-15 15 65 62 4 QY160-22-15 15 160 22 6 QY200-16-15 15 200 16 8 QY25-38/2-3 3 25 38 380 2.5 QY10-54/3-3 3 10 54 2 QY10-70/4-4 4 10 70 2 QY10-86/3-5.5 5.5 10 86 2 QY18-64/3-5.5 5.5 18 64 2.5 QY10-110/4-7.5 7.5 10 110 2 QY18-84/4-7.5 7.5 18 84 2.5 QY10-135/5-9.2 9.2 10 135 2 QY18-110/5-9.2 9.2 18 110 2.5 QY10-160/6-11 11 10 160 2 QY18-126/6-11 11 18 126 2.5 QY10-220/8-15 15 10 220 2 QY18-170/8-15 15 18 170 2.5 Baby Crawling Mat,Transformable Play Mat,Crawling Mat,Baby Bed Play Mat Huizhou City Melors Plastic Products Co., Limited , https://www.melorsfloor.com
Product introduction
QY Oil-filled submersible pump consists of pump, mechanical seal and motor. Pump is at the bottom part of pump, which is adopted centrifugal impeller. Motor which is three-phase is at the upper part of pump and seal is used where pump and motor combine, which is a kind of double end mechanical seal, O rings are applied to all static joints.
Application
This series pumps because of wide range of flow and head, is extensively used for electrical irrigation, forest water spraying, pumping water from well, water tower deliver and urban construction water supply and discharge for farms, villages, industrial and mining enterprise.
Work conditions
The pump can work properly and continuously under following operational conditions:
1) Medium is not corrosive .Sand contents should be max 0.10% by volume and granular size should be max. 0.20mm.
2) Medium temperature shouldn't be over 40ºC and PH should be 6.5-8.5.
3) The pupmps should be operated within rated head.
4) The pumps should be fully submerged into water with depth of less than 3m and max . The pump should be min. 0.5m over the water bottom and not be inserted into sludge .
5) Power frequency should be 50HZ,three-phase voltage 380V,and voltage fluctuation should be 0.9-1.1 times than the rated.
Model instruction
Workshop show
Material
Structure of pump
Material
Can be selected
Pump body
Cast-Iron
Â
Impellor
Cast-Iron
Â
Pump shaft
45 # Steel
Â
Cable
Â
Arbitrary length
Main Specification
