Air Cooled Split Computer Room Air Conditioner (GT-WKR-60)

Posted on

  • Model NO.: GT-WKR-60
  • Air Tube Material: Galvanized Sheet
  • Operating Voltage: 380/400 VAC
  • Application Fields: Office, Home...
  • Lifetime: 5~10 years
  • Condition: New
  • Use: Computer Room, Data Center...
  • Power: Electrical
  • Hs: 8418612090
  • Condenser: Air Cooled, Water Cooled, Dx
  • From: Shanghai, China
  • Specification: SGS, ROHS, BV
  • HS Code: 8418612090
  • Type: Cabinet Air Conditioner
  • Corrosion Durability: Higher
  • Noise Level: Low
  • Mounting: Floor Standing
  • Certification: CE
  • Capacity: 5tons-50tons
  • Cooling/Heating: Cooling and Heating
  • Packing Type: Standard Export Package
  • Application: Data Center, Computer Room...
  • Evaporator: Tube Fin Evaporator
  • Trademark: Shenglin
  • Origin: Shanghai, China
This series product is horizontal packaged ones which consist of supply air,refrigeration,heating,h
umidity,air purification,and electric control section as an integral body.

The unit has the advantages of big refrigerating capacity,simplified refrigerating circuit,compact structure and etc.

The unit can be installed on the roof and do not occupy much space;it is very to connect with air duct.

To ensure a precise temperature and humidity of supply air,the unit adopt computer controller.


GT-HFM series constant temperature and humidity precision air conditioner specification 2
Model  GT-HFM-() 35 40 50 55 60 70 80 90
Spec
ification		 Total cooling 
capacity		 kW 36.5 42.1  49.1 54.1 61 71.6 81.4 93.6 
Sensible
 cooling capacity		 kW 33.8 38.4  44.3 49.8 55.5 65.1 74.7 85.1 
Electric heating kW 15 18 18 18 24 24 30 30
Air volume 2* m3/h 10500 11500 13000 15500 18000 20500 22000 25000
Outlet air pressure 2* Pa 75 75 75 75 100 100 125 125
Noise 3* dB(A) 56 58 58 58 58 58 60 60
Temperature control 
range and accuracy		 ºC 18~28,±1
Humidity control 
range and accuracy		 % 45~70,±5
Power 3N-380V-50Hz
Input power 4* kW 30 38.2 39.6 40.7 52.3 56.7 66.8 74.8
Indoor
 unit		 Supply
 air fan		 type low noise centrifugal type
capacity kW 2.2 3 3 4 5.5 7.5 7.5 11
Electrode
 humidifier		 humidific
ation
 volume		 kg/h 13 13 13 15 15 15 18 21
Electric 
heating		 capacity kW 15 18 18 18 24 24 30 30
Evaporator type  Inner grooved copper tube and aluminum fin
Air filter primary efffect plate type filter
Dimension L mm 1800 1800 2000 2000 2000 2200 2200 2500
W mm 850 850 850 850 850 1080 1080 1200
H mm 2200 2200 2150 2150 2150 2350 2350 2450
Weight kg 580 610 710 750 820 900 980 1250
Outdoor 
unit		 Model GT-( )*quantity WL35*1 WL40*1 WL50*1 WL55*1 WL60*1 WL70*1 WL40*2 WL50*2
comp
ressor		 type Totally enclosed scroll type
quantity 1 2 2 2 2 2 4 4
condenser type  Inner grooved copper tube and aluminum fin
Cond
ensing 
fan		 type Low noise axial type
capacity kW 0.75 0.55*2 0.55*2 0.55*2 0.75*2 0.75*2 0.55*4 0.55*4
Dimension L mm 980 1880 1880 1880 1880 1880 1880 1880
W mm 980 980 980 980 980 980 980 980
H mm 1234 1080 1080 1080 1234 1234 1080 1080
Weight kg 250 320 400 400 450 500 320*2 400*2
Freon 5* type R22(R407C/R410A)
control method Out balance expansion valve
Collecting 
pipe 6*		 liquid 
pipe`s 
diameter		 mm 15.88 
(12.7)		 15.88
*2 
(12.7
*2)		 15.88*2 
(12.7*2)		 15.88*2 
(12.7*2)		 15.88*2 
(12.7*2)		 15.88*2 
(12.7*2)		 15.88*4 
(12.7*4)		 15.88*4 
(12.7*4)
gas 
pipe`s
 diameter		 mm 34.9 
(28.6)		 22.23
*2 
(19.05
*2)		 28.6*2 
(22.23
*2)		 28.6*2 
(22.23
*2)		 28.6*2
 (22.23
*2)		 34.9*2 
(28.6*2)		 22.23*4
 (19.05*
4)		 28.6*4 
(22.23
*4)

Tongue And Groove Face Flanges

The Tongue and Groove faces of this flanges must be matched. One flange face has a raised ring (Tongue) machined onto the flange face while the mating flange has a matching depression (Groove) machined into it's face.

Tongue-and-groove facings are standardized in both large and small types. They differ from male-and-female in that the inside diameters of the tongue-and-groove do not extend into the flange base, thus retaining the gasket on its inner and outer diameter. These are commonly found on pump covers and Valve Bonnets.

Tongue-and-groove joints also have an advantage in that they are self-aligning and act as a reservoir for the adhesive. The scarf joint keeps the axis of loading in line with the joint and does not require a major machining operation.

General flange faces such as the RTJ, TandG and the FandM shall never be bolted together. The reason for this is that the contact surfaces do not match and there is no gasket that has one type on one side and another type on the other side.

Tongue And Groove Face Flanges,Tongue & Groove Flange,Groove Flanges,Tongue And Groove Joint Flange

Fuyuan Marine Accessories Co., Ltd , https://www.fuyuanmarineparts.com