SME heavy duty cantilever metal sump pumps are abrasive resistant pumps for extended wear life and reliability in sumps or pits.
They are designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer.
liquids and slurries whilst submerged in sumps or pits.
Rubber Vertical Slurry Pump, Cossorion Resistant Sump Pumps, SPR Slurry Vertical Pumps Shijiazhuang Minerals Equipment Co., Ltd , http://www.smepump.com
BW-320 plunger mud pump, a multi-purpose horizontal triplex single acting reciprocating piston pump, is designed with eight flow rates by using two cylinders and four gear transmissions. lt can, on the one hand, satisfy needs of an extensive range of new drilling applications, including 1000-meter hydraulic impact drilling, 1500-meter screw drilling, 2500-meter common core drilling, and so on; on the other hand, it can also be utilized to grouting for all kinds of soft foundation, engineering construction drilling, well drilling, alpine water supply, mine drainage, dike grouting, etc.
During the drilling process, this drilling mud pump supplies the drilling hole with sufficient fluid and makes it circulate in the hole in order to carry the debris to the earth surface. In this way, the piston pump reliably keep the bottom of the hole clean, protect the wall of hole from collapse as well as cool and lubricate drilling bits and drilling tools.
The flushing fluid utilized by this plunger mud pump shall not contain any chemical impurities that are corrosive to metals and rubber parts. When using mud for flushing, the recommended proportion of water and mud is between 1.03 and 1.12, viscosity of mud between 18 and 25S, silt content lower than 4%, diameter of sand particles not exceed 3mm, and PH value around 7 to 8. No tiny mud balls, weeds, leaves and other impurities are allowed in the mud.
With sophisticated structure and new materials in China and abroad, small volume and light weight, easy assembly and disassembly as well as long service life of high wear parts, this mud pump enjoys superior performance.
Â
The mud-pump is one of the principal equipments for geological prospecting. While core drilling, the pump supplies the drilling hole with enough volume slurry or cleaning water and makes it circulate in the drilling hole in order to carry the rock debris up to the ground, to make the bottom of the drilling hole clean, to cool and lubricate the drilling tools, to protect the wall of the drilling hole and to help drilling faster. So the performance of mud-pump affects the efficiency of drilling and safety in production directly.
BW-320 MUD PUMP
Type
Single-acting triplex plunger
Stroke
110mm
Bore
80mm
60mm
Pump speed (s.p.m)
214,153,109,78
214,153,109,78
Output volume (l.p.m)
320,230,165,118
180,130,92,66
Discharge pressure (Mpa)
4.0,5.0,6.0,8.0
6.0,8.0,9.0,10.0
Input power (Kw)
30
Suction pipe dia (mm)
75
Discharge pip dia (mm)
50
Drilling hole depth (m)
Diamond core drilling < 3000
Conventroxal core drilling < 2000
Weight (Kg)
650 (without power)
1000 (with motor)
Overall dimensions (mm)
1280*855*750
BW Series Size Mud Pumps Available:
BW-120, BW-145, BW-150, BW150/1.5, BWZ-150, BW-160, BW160/10, BW-160H, BW-200, BW-250, BW-280/12, BW-280/30, BW300/12, BW-300/12B, BW-300/16, BW-320, BW-350/15, BW-450, BW-450/5, BW-600/10, BW-800/15, BW-1000/12, BW-1500/12, BW-2000/12. BW-2500/16.
Horizontal Directional Drill Series Pumps:
BW-100, BW-150GM, BWF-160/10, BWF-240, BW-250A, BWF-250, BW-320A, BWF-400/10, BWF-600/10.
Description:
BW-320 plunger mud pump, a multi-purpose horizontal triplex single acting reciprocating piston pump, is designed with eight flow rates by using two cylinders and four gear transmissions. lt can, on the one hand, satisfy needs of an extensive range of new drilling applications, including 1000-meter hydraulic impact drilling, 1500-meter screw drilling, 2500-meter common core drilling, and so on; on the other hand, it can also be utilized to grouting for all kinds of soft foundation, engineering construction drilling, well drilling, alpine water supply, mine drainage, dike grouting, etc.
During the drilling process, this drilling mud pump supplies the drilling hole with sufficient fluid and makes it circulate in the hole in order to carry the debris to the earth surface. In this way, the piston pump reliably keep the bottom of the hole clean, protect the wall of hole from collapse as well as cool and lubricate drilling bits and drilling tools.
The flushing fluid utilized by this plunger mud pump shall not contain any chemical impurities that are corrosive to metals and rubber parts. When using mud for flushing, the recommended proportion of water and mud is between 1.03 and 1.12, viscosity of mud between 18 and 25S, silt content lower than 4%, diameter of sand particles not exceed 3mm, and PH value around 7 to 8. No tiny mud balls, weeds, leaves and other impurities are allowed in the mud.
With sophisticated structure and new materials in China and abroad, small volume and light weight, easy assembly and disassembly as well as long service life of high wear parts, this mud pump enjoys superior performance.
Â
The mud-pump is one of the principal equipments for geological prospecting. While core drilling, the pump supplies the drilling hole with enough volume slurry or cleaning water and makes it circulate in the drilling hole in order to carry the rock debris up to the ground, to make the bottom of the drilling hole clean, to cool and lubricate the drilling tools, to protect the wall of the drilling hole and to help drilling faster. So the performance of mud-pump affects the efficiency of drilling and safety in production directly.
BW-320 MUD PUMP
Type
Single-acting triplex plunger
Stroke
110mm
Bore
80mm
60mm
Pump speed (s.p.m)
214,153,109,78
214,153,109,78
Output volume (l.p.m)
320,230,165,118
180,130,92,66
Discharge pressure (Mpa)
4.0,5.0,6.0,8.0
6.0,8.0,9.0,10.0
Input power (Kw)
30
Suction pipe dia (mm)
75
Discharge pip dia (mm)
50
Drilling hole depth (m)
Diamond core drilling < 3000
Conventroxal core drilling < 2000
Weight (Kg)
650 (without power)
1000 (with motor)
Overall dimensions (mm)
1280*855*750
BW Series Size Mud Pumps Available:
BW-120, BW-145, BW-150, BW150/1.5, BWZ-150, BW-160, BW160/10, BW-160H, BW-200, BW-250, BW-280/12, BW-280/30, BW300/12, BW-300/12B, BW-300/16, BW-320, BW-350/15, BW-450, BW-450/5, BW-600/10, BW-800/15, BW-1000/12, BW-1500/12, BW-2000/12. BW-2500/16.
Horizontal Directional Drill Series Pumps:
BW-100, BW-150GM, BWF-160/10, BWF-240, BW-250A, BWF-250, BW-320A, BWF-400/10, BWF-600/10.
The heavy duty cantilever design makes the SME Sump Pump ideally suited for heavy continuous handling of corrosive
Bw-320 Multi-Purpose Triplex Slurry Pump
Model NO.: Bw-320 Mud Pump
Quality: High Quality
Trademark: HENGTAN
Transport Package: in Plywood Case
Specification: CE ISO9001: 2000 SGS
Origin: Hunan, China
HS Code: 8413810090
Model NO.: Bw-320 Mud Pump
Quality: High Quality
Trademark: HENGTAN
Transport Package: in Plywood Case
Specification: CE ISO9001: 2000 SGS
Origin: Hunan, China
HS Code: 8413810090
Description: