Discussion on Application of Measurement Test Technology in Electronic Weighing Apparatus

Posted on

[Abstract] In today's science and technology development, electronic weighing instruments are used in all walks of life, especially in the production and operation can not be ignored. Measurement measurement technology is of great significance for the production of electronic weighing instruments. In order to better demonstrate its role, it is necessary to ensure the accuracy and reliability of its measurement. And, good reliability and measurement accuracy cannot be separated from measurement techniques.
Introduction: At present, China's electronic weighing apparatus has hundreds of manufacturers, mostly non-automatic weighing devices. Electronic scales have evolved from the previous introduction of technology to their own R&D and design stages. Especially for non-automatic weighing devices in the development of the weighing display controller is even more rapid. However, with the spot checks on the quality of measuring instruments in recent years, it can be found that most of the major measuring instruments are generally improved in terms of product quality and have not significantly improved in the quality of electronic pricing scales.
First, the importance of measurement testing technology in electronic weighing devices
For electronic weighing instruments, metering test technology is particularly critical. It can provide more accurate data for each company, and can provide good quality assurance for the products it produces, and ensure that the products traded in the market can proceed smoothly. Due to the improvement of people’s material and cultural standards, the rhythm of life is gradually accelerating. In order to keep pace with the times, enterprises still cannot meet the needs of the people if they continue to use traditional business practices. Therefore, as long as companies obtain accurate data materials, they can develop and survive even stronger. Enterprises can only produce high-quality products by unifying all kinds of information. If there is any slight error, it will harm consumers' rights. Through electronic weighing instruments and the scientific use of measurement testing technology, it can improve the company's operating production efficiency, significantly save raw materials and reduce input costs, so as to provide proper results for the company's good development [1].
In addition, when products are traded in the market, there are times when they are short of goods and shortfalls, which affects consumer rights. This situation is caused by problems in the measurement test, which causes products that do not meet the standards to enter the market and affect the normal order of market transactions. Therefore, only by continuously improving the measurement and testing technology of electronic weighing instruments and strengthening the accuracy of application can we prevent the occurrence of such undesirable conditions, expand the scope of application of electronic weighing instruments, mobilize the intrinsic value of measurement and measurement technologies, and truly create an orderly market atmosphere. .
Second, the existence of quality problems
1, when the test temperature does not meet the standard
When manufacturing electronic pricing scales, the temperature is usually tested by watching them change in the environment by placing them in different conditions at high and low temperatures. China's use of electronic pricing scales is specified between -10 and 40°C and storage temperature is between -30 and 80°C to ensure the accuracy of the indicators. If the electronic pricing scale does not meet the standards, then once the environment is hot or cold, there will be greater errors, which will have a greater impact on the test results.
2, does not meet the standard in the anti-electrical pulse train and anti-static discharge test
When testing electronic pricing scales, electronic circuits will be affected by the surrounding environmental conditions and the electromagnetic interference around them. Through testing, we can see that the electronic pricing scales are in use. If we answer the calls at this time, we will It has an effect and results in inaccurate measurement results, which results in an erroneous result.
3, does not meet the standard when testing hot and humid
In the inspection of whether the electronic pricing scale meets the standards, if it is necessary to understand whether the electronic pricing scale will be affected by the humid environment, and how the insulation status is, the damp heat test must be performed, that is, put the electronic pricing scale at high temperature and relatively humid Check to see if it can be used normally in such an environment. For an integrated market that sells seafood or a large number of goods, if the moisture content of the goods is high, a hot and humid test must be performed. Once the electronic scales do not meet the standards, there will be large in and out of weighing [2].
Third, the electronic weighing device in the manufacturing failed
1, did not consider the overall design of the appliance
Some manufacturers did not consider the surrounding environment and even the facilities during the process of designing appliances, and did not propose good preventive measures. Therefore, the ability of manufactured devices to prevent interference was too poor.
2. Make electronic weighing devices and choose inexpensive materials and facilities for production
Some companies that manufacture electronic weighing instruments blindly hope that they can get the maximum benefit from the lowest investment. Therefore, in the manufacture of appliances, only inexpensive materials and equipment are selected for manufacturing. For example, in the manufacture of electronic pricing scales, load cells are among the most critical components. Some companies use sensors that are relatively low in price and of low quality, making the quality of manufactured electronic pricing scales too poor, and the measurement data inaccurate.
3. The corresponding standards have not been strictly implemented when monitoring manufacturing equipment
When assembling electronic scales, workers are not able to complete the assembly in the shortest possible time in order to be able to use the fastest time to complete the assembly. This has made it impossible for electronic scales to pass through in terms of quality, resulting in a waste of resources, material resources, and financial resources.
Fourth, with the fault
There are two types of electronic weighing instrument failures: common faults and special faults. The main reasons for these problems are the unreasonable design and installation, the unreasonable use of the product, and the natural wear and tear. Unreasonable product design and installation will result in inconsistent or missing numbers of electronic weighing devices. In the use of electronic weighing instruments in the harsh environment, in the process of use, it is easier to see sand particles in the bottom or side gap, which will make the measured number is not stable enough. This is because the sensors in the body are shielded and affected by external pressure, causing large deviations in the measurement data. At this time, only the impurities in the weighing system need to be removed. Another reason is that the operation is not standardized when installing the electronic scale. For example, some chemical plants in the detection of electronic weighing device, when the weight is less than 30t, the load bearing results are more accurate, but when the weight is greater than 30t, there will be obvious errors, no foreign body was found in the body after the inspection, the voltage of the measuring sensor and The resistance is also very normal. No problem was found in replacing the weighing instrument. Finally, through the addition of weights, it was found that when the weight reached 32 tons, the error would increase, decreasing 1 ton, and the error would decrease accordingly. The iron block used by the pad sensor blocks the steel channel of the weighing platform. There is an empty seam in the empty weighing state, which makes it more accurate when measuring small tonnages, and errors may occur when measuring large tonnages.
The insufficiency of the components themselves will also make the electronic weighing device less stable. This fault will be handled by supplementing the compensation line to the excitation line. Adding a six-wire four-wire structure can enhance the signal and clear the fault. Another aspect that makes the value unstable is the water in the junction box. This condition can be dealt with if it is ventilated and dry. The way to judge these faults is test technology. For example, the resistance value of the compensation line, the excitation line signal line and the shielding line is measured by a multimeter. If the resistance between the measured shielding line and the signal line is 30 ohms, and the signal line surface is short-circuited after fracturing, this problem can be solved by Change the main line for processing.
V. Measurement and Testing Technology
Metering test technology as the fundamental maintenance of electronic weighing instruments, the same failure will be caused by different reasons. For example, in the monitoring, the sensor value changes, the resistance and the cause of the sensor are eliminated, and the problem is caused by the looseness of the screw in the terminal board. Therefore, this condition requires only tightening the screw. In the maintenance phase of the electronic scale, the zero line condition of the sensor is more difficult. Zero drift of the sensor will make the value unstable, but this problem is rare. Only by using a simple measurement tool, it is not possible to determine which sensor is faulty. In this case, processing can be performed by reducing the indexing value [3]. Record the values ​​of all sensors, and record again after a certain period of time. If the value changes, then divide it into the test. After measuring the voltage and resistance, you can find through the test that it is a zero drift problem of the sensor, so just replace it. You can solve the problem.
Conclusion: In summary, for the measurement and testing technology, it is necessary to continuously clarify the trend of the development of electronic scales, and constantly use advanced measurement and measurement technologies to deal with the quality problems of electronic pricing scale measurement tests. Moreover, it is necessary to combine the characteristics of the era, completely update the design concept, and update the system structure model. Only then can we really improve the overall quality standard of electronic weighing instruments, establish significant economic and social benefits, and truly complete the sustainable development.
references
[1] Ding Cheng, Sun Fei. Discussion on the important role of weighing instrument in measurement test [J]. Heilongjiang Science and Technology Information. 2015.(15): 66.
[2] Xiao Yuzong. The application of measurement measurement technology in electronic weighing instrument [J]. Science and Technology Get Rich Wizard. 2015. (03): 277.
[3] Zhu Hanguang. Analysis of measurement and measurement technology in electronic weighing instrument [J]. Science and Technology Get Rich Wizard. 2015. (20): 131.
Author: Tangzhuan Min Liu Chunfang Source: China Science and Technology Expo 2016 5

Medium Pressure Filter is installed in the hydraulic pressure system to filter solid particle and slimes in medium and effectively control cleanliness.

Filter Element adopts many kinds of materials, such as glass fiber, resin-impregnated paper, stainless steel sintered fiber felt, stainless steel wire mesh ect.

Working pressure (max): 11MPa; 21MPa

Operating medium: mineral oil, emulsion, water-glycol, phosphate ester, gas

Medium Pressure Filter

Pressure Filter,Inline Hydraulic Filter Fmq,Medium Inline Filters,Medium Pressure Filter

Xinxiang Tianrui Hydraulic Equipment CO.,LTD , https://www.filterelement.pl