Mechanical Shaft are available in carbon steel,alloy steel and brass material ,the finish/plating: Nickel Plate.
A shaft is a rotating machine element, usually circular in cross section, which is used to transmit power from one part to another, or from a machine which produces power to a machine which absorbs power.The various members such as pulleys and gears are mounted on it.
Mechanical Shaft used wildly in Electronic .
Mechanical Shaft Mechanical Shaft,Structural Steel Shaft,Cnc Machining Mechanical Shaft,High Strength Mechanical Shaft Shenzhen Long Wei Wang Precision Technology Co., Ltd. , http://www.electronichdwe.com
Electric heating constant temperature incubator is suitable for scientific research and industrial production departments such as medical and health, pharmaceutical industry, biochemistry and agricultural sciences for bacterial culture, fermentation, and thermoelectric constant temperature incubator temperature test.
1. When using electricity, avoid contact with the electric part of the space on the left side of the incubator with electric heating or wipe with a damp cloth and rinse with water.
2. When the electrothermal constant temperature incubator is placed in valuable strains and cultures, it should be observed and abnormal conditions should occur. Immediately cut off the power supply to avoid external or unnecessary losses.
3, the power cord can not be wrapped around metal objects, can not be placed in a hot or humid place, to prevent rubber aging and leakage.
4, after each use, the power must be cut off. Keep the inside and outside of the electric heating constant temperature incubator clean and the water in the tank clean.
5, the test objects placed in an electric constant temperature incubator should not be overcrowded, so that the air flow, keep the box evenly heated, the inner floor near the heater, it should not be placed test objects. In the laboratory, the wind top door should be unscrewed properly in order to adjust the temperature inside the box.
6. When not necessary, do not open the temperature control instrument in the incubator to prevent damage.
7. The fuse tube is installed in the left space inside the electric constant temperature incubator box, and the side door needs to be opened when switching, and the power must be cut off.
8, electric constant temperature incubator working voltage is AC 220V, 50Hz. Before use, you must pay attention to whether the power supply voltage used is in accordance with the specified voltage, and ground the power outlet grounding pole as required.