5k medal,10k run medals,best marathon medals,10k race medals,custom running medals,custom award medals ZHONGSHAN LAVI HARDWARE PRODUCTS CO., LIMITED , https://www.lavihareware.com
It is suitable for drying raw materials in bulk or granule, for example, in pharnaceutical industry: medical raw materials, granule for pressing tablet, drinking medicine of Chinese traditional medicine; in chemical industry: drying and dehumidifying of plastic resin, citric acid, other powdery or granule raw materials; in foodstuff and grain process industry: drying for drinking material of foodstuff, maize embryo and feedstuff. In general, the diameter of raw materials will be 0.1~6mm. The best diameter will be 0.5~3mm.
General Descriptions:
Boiling dryer is also called as fluidized-bed. It consists of air filter, heater, fluid bed main machine, feeder, cyclone separator, bag duster, high-pressure centrifuge fan, operation table and so on. Because the properties of raw materials are different, when dust collecting equipment is equipped, it should consider the practical needs. It can select cyclone separator and bag filter at the same time or one of them. Generally speaking, it needs to select cyclone separator only for the raw material that is heavy in specific gravity and bag filter for powdery and small granule raw materials that are light in specific gravity. Meanwhile there is a complete feeder for selection.
Principle:
Separated granule solid raw material is fed into fluidized-bed dryer through feeder. The fresh air through filtering and heating is sent to the bottom of fluidized-bed by fan and contacts with solid raw material on distributing plate. In this way the fluidized state is formed and the heat exchange between air and solid is carried out. The dried raw material is discharged from outlet and wasted gas is exhausted from the top of fluidized-bed where catches solid powder through cyclone separator and bag filter.
Heat Sources:
Steam, electricity or hot air furnace can be used (it can be supplied as requested).
Technical Data:
Type
Drying capacity (Kg/h)
Fan
Air intake temperature
(º C)Material discharge temperature
(º C)Heating energy consumption
Power (kw)
Air pressure (Pa)
Air volume (M 3 /h)
Steam (kg/h)
Elec. Power (kW)
XF-10A
10-15
5.5
4900
2300
60-140
40-80
50
30
XF-10B
4
3800
2300
XF-20A
20-25
7.5
5000
3100
50
60
XF-20B
5.5
3500
3100
XF-30A
30-45
15
6000
4200
50
90
XF-30B
11
4700
4200
XF-50A
50-80
22
7400
6000
250
150
XF-50B
18.5
5900
6000
Information to Be Provided When Sending Inquiry:
Material to be dried (or chemical formula): Moisture to be evaporated: water or solvents: Boiling point of solvents:          ºC       (  ) received      (  ) non-received State of material to be dried: (  ) liquid   (  ) slurry   (  ) cake   (  ) powder   (  ) others Outputs of material to be dried (Capacity):                       kg/hr                    Â
Moisture content before drying: Â Â Â Â Â Â Â Â Â Â % Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Moisture content after drying: Â Â Â Â Â Â Â Â Â Â Â Â Â Â %
Temperature before drying               ºC
Temperature after drying:                  ºC
Max. temperature of material to be dried allowed:   ≤    ºC  Product cooling: (  ) no need     (  ) natural cooling     (  ) by surrounding air   (  ) by process air (low temp. air)
Specific heat:                   kcal/kg.ºC
Coefficient of heat conducting: Â Â Â Â Â Â Â Â kcal/m3.h
Real density of material:
Bulk density of material:
Mean particle size:
Maximum particle size: Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â um
Minimum particle size: Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â um
Material requirements of equipment: Requirements of equipment:  (  ) explosion-proof    (  ) non-explosion-proof     (  ) others Electrical power:  3Φ,380V,50Hz          others Heat source:  electricity;     steam:        Mpa;       hot water:        ºC;
            conduction oil:    ºC;      hot air by gas/LPG/fuel:             ºCDrying equipment to be suggested:
1. Hot air circulation oven        2. Vacuum dryer        3.  Fluid bed dryer
4. Spray dryer               5. Flash dryer          6. Mesh belt conveyor dryer   7. Rotary dum dryer            8. Hollow paddle dryer     9. Vacuum rake dryer     10. Vibration fluid bed dryer        11. Air flow dryerOthers:
Company Profile:
Changzhou Aokai Drying Equipment Co., Ltd. was established in 2004, and is specialized in the design, manufacturing and development of the drying, calcination, cooling, crushing, mixing and granulating equipment. 
The company has 4 modern standard workshops, about 13600 m2. There are 15 mid-level and senior engineers. It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories. The company can provide dryer, solutions and service according to GMP, cGMP and FDA certification.
The company has obtained the certification of "National High-Tech Enterprise", been the member of China Pharmaceutical Equipment Industry Association. Also, the company has passed ISO9001:2008 Quality Management System Certification, ISO14001:2004 Environmental Management System Certification and many other certificates as well as 20 more core technologies getting patent certificates.
For a long time, the company focuses on the scientific and technological innovation, always persists in the technology upgrading as the core, and takes the optimizing of the product structure as the development direction. The company has a professional technical team to cooperate with some scientific and research institutes to develop new products, absorbs and digests advanced technologies from China and overseas, continues to explore various patent technologies to widely used in the fields of chemical, pharmaceutical, foodstuff, pigments, new materials and military industries. Aokai has already stepped into the international market and established a good reputation.
With the development, the company has accumulated strong capital and technical strength, created an intelligent and harmonious team. The company has a pilot plant with many types of testing machine for customers to do test and select suitable models.
Aokai sincerely welcome the majority of insight to make great achievement together. Also warmly welcome to Aokai.
FAQ:
1. Q: Please describe your warranty period.
   A: 15 months after the equipment is arrived at the destination port or 12 months after  the installation and commissioning of the equipment, whichever comes first.
2. Q: Do you provide on-site installation and commissioning?
  A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.
3. Q: How about the cost of on-site installation and commissioning guidance?
   A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.
4. Q: Are you a factory or a trading company?
   A: We are a professional manufacturer. We have a pilot plant for customers to do sample testing.Â
Â
Â
Fluid Bed Drying Machine for Chemical Industry by Professional Manufacturer
Model NO.: XF
Type: Horizontal Multi-Chamber
Feeding Method: Screw Feeder
Dust Control: Bag Filter
Design and Fabrication Stds.: GB, En
Material: Stainless Steel
Trademark: ChangAo
Transport Package: Wrapping Film and Wooden Case
Specification: FCL
Origin: Changzhou, China
HS Code: 8419399090
Scope of Application: