According to Bob, "The first bio-polyethylene industrialization plant in Braskem is currently under construction in Brazil and it will be put into operation this year. In addition, I believe that some other producers in the rich Ganzi country will also use this raw material to invest in the construction of biological materials. Polyethylene and polypropylene devices." According to the European Bioplastics Association, the association predicts that the global bioplastic output will reach 1.46 million tons/year by 2013 based on two aspects of the prediction, of which the compostable bioplastic production will be 409,000 tons/year from 2009. Growth to 788,000 tons/year in 2013; non-compostable bioplastics production will increase significantly from 25,000 tons/year in 2009 to 715 thousand tons/year in 2013. The 200,000-ton/year bio-polyethylene plant under construction in Brazil's Braskem will be put into production by the end of this year. Braskem has also established a research partnership with Novozymes. Both parties will develop polypropylene production using Ganzi as raw material. In a telephone interview with ICIS News, Kapper said: “More and more bioplastics will appear in the fields of packaging, film, shopping bags, mobile phones, beverage bottles, etc. We have already seen that Coca-Cola’s PET bottles use biotechnology. Plastics and Tetra Pak are also seeking to use bio-plastics. Of course, bio-based plastics are still higher in cost than ordinary plastic products. This is usually passed on to consumers, but most consumers are willing to pay this premium."
Metal electroplating line is widely used in aircraft and auto parts, machinery parts, metal, hardware processing industries, including cooper plating, silver plating, zinc plating, nickel plating, gold plating, chrom plating, anodizing, electrophoresis production line,etc.
Anodizing uses chemical or electrochemical treatment to generate a film layer containing the metal component on the metal surface. The metal material as the anode is protected by a material that forms a film on the surface by applying an electric current in a specific electrolyte. Anodizing is a method of metal surface treatment. Most metal materials (such as stainless steel, zinc alloy, aluminum alloy, magnesium alloy, copper alloy, titanium alloy) can be anodized in a suitable electrolyte. Anodizing Line,Oxidation Production Plant,Al Alloy Oxidation Line,Anodizing Plating Line Wuxi Xingyi Intelligent Environment Protection Equipment Co.,Ltd. , https://www.xingyimachinery.com
Anodizing is to use aluminum alloy's easy oxidation characteristics to control the formation of oxide layer by electrochemical method to prevent further oxidation of aluminum material and increase the mechanical properties of the surface.
Global bioplastic production will reach 1.46 million tons/year in 2013
According to the European Bioplastics Association Secretary-General Harald Kapoor, the global bio-plastics production in 2013 should be nearly four times the current output to 1.46 million tons/year, stimulated by the start of the operation of bio-polyethylene plants.