The cutting machine is suitable for the cutting of Chinese medicinal herbs including rhizomes,fruitages,leaves,and grasses etc before it being fine processed,grinded or extracted,as well as for the cutting process of foodstuff(sliced fruit,preserved fruit),aquatic products(sliced kelp),tobacco leaves,and tea leave etc.This slicing machine is composed of motor, variable speed mechanism, tool rest, step and retreat material, adjustable tool rest machinery and so on. Due to the use of advanced step feeding, so that the cut of the sheet shape uniform, can freely control the feeding distance, will not cause the material extrusion knife bad situation. Due to the reasonable layout, the machine is easy to operate, light appearance, light weight. This machine is mainly composed of two parts, such as conveying and cutting medicine, machinery and so on.
Herb Cutting Machine,Herb Cutting Machine,Herb Cutter,Slicing Machine,Electric Cutter JIANGYIN CITY XUAN TENG MACHINERY EQUIPMENT CO.,LTD , https://www.machineryxuanteng.com
Features:
1.adjust the blade by computer,no gasket
2. The back end can be semi-stripped
3. Operation screen KINCO7 inch full english version
4.Pneumatic parts is TAIWAN Airtac
5. Control: 32 full SCM control system
6. Servo: Delta servo
7. Guide rail with silver, decelerator PHT
8. Detection of Japanese keenshi. Omron
9. The rear end is suitable for horizontal, straight OTP mould
Product specifications:
1.Model: high speed automatic terminal press (double end pressing)
2.Machine function: the computer controls both ends of the pressure, blade, peeling, semi-stripping and detection
3.Production capacity: 0.7sec/bar at both ends of the length 40MM
4.Speed: 40MM an hour 4000 root (feed speed 3000secMAX)
5.Wire cut length: 40-9999mm
6.Cut off accuracy: the deviation is 0.5MM when the cutting length is less than 100MM, and the cutting length is greater than 100MM and the deviation is positive and negative 1.0MM
7.Stripping length: 1 side 0.1-9.0 (semi-stripping 3.0-9.0 MM) 2 side 1.0-9.0MM (half stripping length 3.0-9.0 MM)
8.Press ability: 19600N(2T) mute terminal machine 2 (using mould AS42.AS40.AAE30)
9.Control mode: 32-bit microcomputer system
10.Check  function: check whether there are any wires, check the wire too tight, detect abnormal pressure, check the abnormal
11.Power supply: single phase AC220 50/60hz
12.Compressed air: 0.4mpa - 0.5mpa (with air volume about 130NI/min- 180NI/min)
13.Temperature range: around 15-30 degrees
14.Machine size: 1000*700*1550MM (not including the protrusions)
15.Weight: 460KG
Â