1. Naipu L series lower abrasive Slurry Pump description
L series Rugged Heavy Duty Slurry Pump for
medium to lower heads.It incorporates the same design points of the
NP-AH(R) and plus higher efficiency impellers at an attractive initial
cost.Designed for rugged duties while offering higher efficiencies, the
NP-L series is a combination of the proven NP-AH(R) unique features.The
pump is available with interchangeable liner options including both
metal and various grades of elastomer depending on the application.
Slag Granulation
2.L series lower abrasive slurry pump construction drawing
3. L Lower Abrasive Slurry Pump select chart
4. L Lower abrasive slurry pump performance parameters
Type
Allowable Mating Max. Power(Kw)
Clear Water Performance
Impeller
Capacity/Q m³/hr
Head/m
Speed/rpm
Max Efficiency/%
NPSH/m
Nos of Vane
Impeller Diameter/mm
20A--NP-L
7.5
2.34-10.8
6--37
1400--3000
30
4
152.4
50B-NP-L
15
16.2--76
9--44
1400--2800
55
3.5--8
5
190
75C-NP-L
30
18-151
4--45
900--2400
57
3--6
4
229
100D-NP-L
60
50-252
7-46
800--1800
60
2--3.5
4
305
150E-NP-L
120
115--486
12-51.5
800--1500
65
2--6
4
381
200E-NP-L
120
234--910
9.5--40
600--1100
64
3-6
4
457
250F-NP-L
120
396--1425
8--30
500--800
77
2--10
5
550
300S-NP-L
560
468--2538
8--60
400--950
79
2-10
5
653
350S-NP-L
560
650--2800
10--59
400--840
81
3--10
5
736
400ST-NP-L
560
720--3312
7--51
300--700
80
2--10
5
825
450ST-NP-L
560
1008--4356
9--48
300--600
80
2--9
5
933
550TU-NP-L
1200
1980-7920
10-50
250-475
86
4-10
5
1213
L Lower Abrasive Slurry Pump Lower Duty Slurry Pump,AH Mining Pump,L Lower Abrasive Slurry Pump Shijiazhuang Naipu Pump Co., Ltd. , http://www.naipu-pump.com
1. Battery quality selection To ensure the low temperature start-up quality of the battery, if necessary, the battery should be kept warm to ensure normal charging under low temperature conditions and sufficient current output to ensure the starting system power.
2, choose good low temperature performance of fuel and oil Good oil low temperature viscosity, lubrication between the friction surface is good, starting resistance is small, is conducive to engine start.
3, the use of low temperature starting liquid Low temperature starting liquid ignition point is low, the engine speed is lower, that is, the compressed air temperature and pressure is low under the circumstances can quickly ignite, so as to ignite the fuel in the combustion chamber to achieve engine start.
4. Heating and Cooling Medium The above three methods can only ensure that the diesel generator starts normally when the ambient temperature is higher than -30 degrees, and the engine is started when the temperature is lower than -30 degrees.
5. Heating device is installed on the air intake pipe After the heating device is installed on the air intake pipe, the resistance wire installed in the air intake pipe is heated by using electric energy inside or outside the machine, thereby increasing the intake air temperature and ensuring the start of the engine.
Typical Applications---
Chemical Process
Heavy Minerals
Plant Water Supply
Thickener Overflow
Paper and Pulp
Method for starting diesel generator at low temperature
The generator set manufacturers today share the way that diesel generators start at low temperatures: