The mining safety of open pit mines is the same as that of underground mines. It is the focus of safety production and is also difficult. Eliminating the hidden dangers of open pit mining accidents, controlling mine production accidents, reducing casualties and property losses is an important issue in mine safety and must be highly valued. Hidden dangers and hazards Through investigation, it is known that there are many hidden dangers in open pit mining, mainly in the following aspects: First, some mining face slopes are too steep, and there are still partial yin mountains; second, some do not have alarms, avoid The gun room (cavity); the third is that more than half of the topsoil stripping work on the top of the kneading surface has not been done; the fourth is that some work sites are piled up and the accumulated water is too clean; five are some production noodles and processing sites, houses, roads The safety distance between the two does not meet the requirements; six is ​​that some production of floating surface (risk) stone cleaning is not clean; seven is that the blasting fuse is generally shorter than 1.2 meters; eight is part of electrical equipment, lines are worn out, and some lines are not erected Norm; nine is the absence of equipment, the operator is not certified and the helmet does not wear according to the rules; 10 is overloaded with transport vehicles. The existence of the above hidden dangers seriously threatens the safe production of open-pit mine enterprises. If they are not seriously solved, accidents may occur at any time. The lessons of blood in history are too painful; due to the steep slope of the mining face, a mine collapsed, nearly 60 tons of stone will be buried by two miners to death; due to the existence of the Da Yin Shankan, an abandoned mine collapse, 10 will be in the cave The villagers who picked up the slag were crushed to death; because there were no sirens or anti-cannon rooms (holes), a mine miner was concealed from time to time and was knocked down by flying stones. Because there is no provision for stripping the topsoil of the top surface, it is easy to cause mud wraps. The death of a miner is caused by a mud-wrapped stone; due to the narrow working site or too much material, or excessive water accumulation, once the danger occurs, it will cause obstacles to evacuation and lead to death; due to insufficient safety distance, a woman When walking on a village road 200 meters away from a mine, he was killed by flying stones; because the production of floating surface (risk) stones was not cleaned, a miner was knocked down by the falling pumice in the gravel field; Too short, a blaster fell when he evacuated. When the climber climbed, the gun rang and was killed by flying stones. Because of the private pull and power, a mine electrician was electrocuted; due to illegal operation, a gravel was transported. Involved in death; caused by heavy overload of the transport vehicle In addition, since the upper jaw workers did not wear a seat belt, it was often the case that the upper jaw fell to the height of the pumice when it fell to the ground. Causes and countermeasures The existence of any hidden dangers and the occurrence of accidents have their causes. The existence of hidden dangers in open pit mining accidents is mainly due to the indifferent legal concept of mine owners and employees, the lack of safety awareness, the lack of safety investment, and the low quality of personnel. To solve the many hidden dangers in open pit mining, and to fundamentally eliminate and reduce the accident rate, we should start from the following aspects: First, we must strengthen the legal education of the mine owners and improve their legal concepts. It is necessary to conscientiously publicize and implement the "Safety Production Law", "Mineral Safety Law" and "Safety Regulations for Mines", so that the mine owners can understand the law and engage in mining activities in accordance with the requirements of legal regulations. The second is to strengthen safety education and strive to improve the safety awareness of employees. To carry out safety common sense education, we must also carry out case education and use blood lessons to persuade and perceive practitioners. Third, it is necessary to enforce safety investment and standardize the mining environment. It is necessary to set the alarm device and the escaping house (hole) according to the regulations; the erection of the mining area line should conform to the specifications, the aging wire should be updated in time, and the distribution box should be set as required, and the replacement of the broken distribution board is prohibited; the use of scrapped vehicles is prohibited. And mechanical equipment, and shall declare safety inspection according to the regulations; the protective equipment for operators shall be fully equipped; the slope of the mining face shall be controlled within the range of 70 ° to 75 ° as required by the specification; the yam shall be leveled in time; the topsoil of the top of the raft shall comply with the regulations. Requirements should generally be maintained at more than 2 meters, and advance with the mining progress; the work site should be rationally used according to the requirements, the piled materials should be cleaned up in time, the site water should be removed in time; the production of noodles and buildings, roads, etc. Leave a sufficient safety distance (should be above 300 meters). Every time the blasting of the shovel (risk) stone must be thoroughly cleaned; the length of the blasting fuse must meet the requirements of the specification, reaching 1.2 meters or more. In addition, the mines are mainly required to report the environmental safety inspections in time according to the regulations. In addition to the annual inspections, major dangers should be reported at any time in order to scientifically eliminate hidden dangers. Fourth, we must improve the quality of relevant personnel and prevent them from doing a good job. The person in charge shall receive relevant safety knowledge training and obtain the "Minister's Safety Qualification Certificate"; the operator shall participate in relevant professional training according to the type of work, obtain the corresponding "Special Operation Personnel Operation Certificate", prohibit unlicensed employment and illegal operations. To lay the foundation for radically eliminating the savage work. Fifth, we must increase safety supervision and prevent problems before they happen. Mining enterprises are generally remote, relatively hidden, and difficult to monitor. It is precisely because of this that some people with indifferent legal concepts are timid, as long as the money does not kill, and the regulations are behind the scenes, so that fatal accidents occur frequently. Therefore, it is necessary to increase the supervision of mining enterprises and force them to mine and standardize operations according to law. Lathe Machining,Cnc Lathe For Sale,Cnc Lathe Machine,Cnc Turning Ningbo Leyan Machinery Technology Co., Ltd , https://www.cncleyan.com