Overview of maintenance and repair points

Everyone should be familiar with the security gate. It is a common inspection facility and is widely used in railways, aviation, etc. This article will introduce you to the overview of maintenance and repair points.
Security door maintenance points
1. The stain on the surface of the door can be wiped with a damp cloth.
2, oil stains and stains that are difficult to clean can be wiped with water, alcohol, and machine water.
3, need to shut down more than 2 hours a day, in order to prevent long-term work components overheating and reduce performance.
4. In addition to the full rain-proof security door, other types of security doors cannot be rained, and must be covered with rain canopy in the open air.
5. There should be no large metal objects within 1 meter around the security gate, such as large iron gates, elevators, and large iron pillars.
6. The installation of the security door must be fixed firmly to avoid the sway of the door caused by strong wind or collision.
7. Keep away from objects that generate magnetic fields, such as distribution boxes and electrical equipment.
These are the overview of the maintenance and repair points of the security door. I hope that everyone can better apply it to practice after understanding, and hope that everyone can use the security door correctly.

Most car, truck, and SUV owners understand the importance of having good windshield wipers on their vehicles at all times. However, many of them may not know that the windshield wiper blades and arms are moved back and forth by the Windshield Wiper Linkage. The linkage is attached to the Wiper Motor, which is typically hidden under the hood of the vehicle and protected from the elements. The Wiper Linkage may fail  because it is not always protected from the sun, snow, wind, and rain and may be susceptible to wear and tear or breaking entirely without warning.

The windshield wiper linkage is designed to last the life the vehicle, but like any other mechanical part it can break when you least expect it to occur. One of the most common causes of premature wear and tear is overuse in wet weather climates or in cold areas where the windshield wipers are frozen and may stick to the windshield. This causes the linkage to strip from the Wiper Arm , requiring them to be replaced.

There are a few warning signs that will indicate that a problem with the windshield wiper linkage is beginning to wear out that if noticed early and fixed, can reduce additional parts breakage including the wiper motor.

One-Way Scraping Wiper Linkage

One-Way Scraping Wiper Linkage,Windshield Wiper Linkage,Window Wiper Linkage,Car Wiper Linkage

COMOTECH ASIA PACIFIC (HANGZHOU)CO.,LTD , https://www.capwiper.com