Pipe Former with Ce Certificate (2CPV)

Model NO.: 2CPV
Tube Od of Flaring: 3-50 mm
Tube Od of Beading: 6-45 mm
Tube Material: Titanium Alloys, Stainless Steel, Aluminum Alloy
Rotation Axis: Asynchronous Motor, 0.75kw
Trademark: Hartco
Transport Package: Wood
Specification: OD6-50mm
Origin: Shanghai
HS Code: 8461909000
Model NO.: 2CPV
Tube Od of Flaring: 3-50 mm
Tube Od of Beading: 6-45 mm
Tube Material: Titanium Alloys, Stainless Steel, Aluminum Alloy
Rotation Axis: Asynchronous Motor, 0.75kw
Trademark: Hartco
Transport Package: Wood
Specification: OD6-50mm
Origin: Shanghai
HS Code: 8461909000
2CPV Table Model Tube End Finish Machine
Description: Table Model Tube End Finish Machine
Model: 2CPV
Application:Used for deburring,flaring,Beading for Inside and outside of metal round tube end.
Introduce:
Using the tube end-finishing machines, the ends can be prepared with a bead or flare, or simply deburred and squared. Each machine is capable of performing all of these functions -a change of tooling is all that is required to switch from one function to another.
Main Specification:
  1. Dimensions: Long X Wide X High (excluding protruding parts) =460X650X380mm
  2. Weight: 160 kg
  3. Power supply: 220V±10%, 50Hz/60Hz, single phase
  4. Power: 1 KW
  5. Air pressure: 0.4-0.8MPa;
  6. Clamping mode: pneumatic;
  7. Clamping force: >=5KN;
  8. Rotation axis: asynchronous motor, 0.75kw;
  9. Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
  10. Rotation axis deflection: ≤0.01 mm;
Capacity:
  1. Tube OD of chamfer/squaring/deburring: Φ6-50mm;
  2. Tube WT of chamfer/squaring/deburring: ≤10mm;
  3. Tube OD of flaring: Φ 3-50 mm;
  4. Tube WT of flaring: Stainless steel 0.4 ~ 1mm, Aluminum alloy 0.5 ~ 1.5mm;
  5. Flaring method: eccentric inner diameter rotary swage;
  6. Tube OD of beading: Φ6-45 mm;
  7. Tube WT of beading: stainless steel: ≤0.5mm, aluminum alloy: ≤ 1mm;
  8. Beading method: inner diameter rotary swage;
  9. Tube min clamp: 10mm (flare tube is based on material and wall thickness);
  10. Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;
Features:
  1. One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
  2. After quick change dies, it can complete the tube flaring processing and beading.
  3. Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
  4. Thin clamp and thin dies, the minimum length of tube is 10mm, which is the first and best level.
  5. Operating lever and clamping cylinder joint together, when pull the operating lever, the cylinder clamping automatic clamping tube, then the main shaft forward, after the processing complete, release lever, spindle retreat, cylinder clamping automatically open.
  6. Equipped asynchronous motor spindle, speed variable frequency control adjustment, is suitable for the processing of different materials.
  7. Tube feeding length positioning function, ensure tube process length and repeat precision.
  8. Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
  9. The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
Main Components:
  1. The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
  2. Variable frequency control of motor, to achieve the spindle high precision control.
  3. Clamp on the machine cabinet front, it can clamping minimum 10mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
  4. The clever design chip groove in clamp, lead the dust smoothly into waste box.
  5. The mechanical lever of connecting rod reduces the feed speed, operation more smooth and efficient.
  6. Tube feed stopper: when the spindle forward, stopper automatic drop down. Feed length is adjustable, and can be mechanical lock.
  7. Spindle feed position:ensure consistency processing of feed, while ensuring the spindle and clamp non-interference.
  8. Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.
Tooling:
  1. Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.Pipe Former with Ce Certificate (2CPV)
  2. Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.Pipe Former with Ce Certificate (2CPV)
  3. The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness.
    Pipe Former with Ce Certificate (2CPV)
  4. Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading. 
    Pipe Former with Ce Certificate (2CPV) 
     
2CPV Table Model Tube End Finish Machine
Description: Table Model Tube End Finish Machine
Model: 2CPV
Application:Used for deburring,flaring,Beading for Inside and outside of metal round tube end.
Introduce:
Using the tube end-finishing machines, the ends can be prepared with a bead or flare, or simply deburred and squared. Each machine is capable of performing all of these functions -a change of tooling is all that is required to switch from one function to another.
Main Specification:
  1. Dimensions: Long X Wide X High (excluding protruding parts) =460X650X380mm
  2. Weight: 160 kg
  3. Power supply: 220V±10%, 50Hz/60Hz, single phase
  4. Power: 1 KW
  5. Air pressure: 0.4-0.8MPa;
  6. Clamping mode: pneumatic;
  7. Clamping force: >=5KN;
  8. Rotation axis: asynchronous motor, 0.75kw;
  9. Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
  10. Rotation axis deflection: ≤0.01 mm;
Capacity:
  1. Tube OD of chamfer/squaring/deburring: Φ6-50mm;
  2. Tube WT of chamfer/squaring/deburring: ≤10mm;
  3. Tube OD of flaring: Φ 3-50 mm;
  4. Tube WT of flaring: Stainless steel 0.4 ~ 1mm, Aluminum alloy 0.5 ~ 1.5mm;
  5. Flaring method: eccentric inner diameter rotary swage;
  6. Tube OD of beading: Φ6-45 mm;
  7. Tube WT of beading: stainless steel: ≤0.5mm, aluminum alloy: ≤ 1mm;
  8. Beading method: inner diameter rotary swage;
  9. Tube min clamp: 10mm (flare tube is based on material and wall thickness);
  10. Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;
Features:
  1. One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
  2. After quick change dies, it can complete the tube flaring processing and beading.
  3. Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
  4. Thin clamp and thin dies, the minimum length of tube is 10mm, which is the first and best level.
  5. Operating lever and clamping cylinder joint together, when pull the operating lever, the cylinder clamping automatic clamping tube, then the main shaft forward, after the processing complete, release lever, spindle retreat, cylinder clamping automatically open.
  6. Equipped asynchronous motor spindle, speed variable frequency control adjustment, is suitable for the processing of different materials.
  7. Tube feeding length positioning function, ensure tube process length and repeat precision.
  8. Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
  9. The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
Main Components:
  1. The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
  2. Variable frequency control of motor, to achieve the spindle high precision control.
  3. Clamp on the machine cabinet front, it can clamping minimum 10mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
  4. The clever design chip groove in clamp, lead the dust smoothly into waste box.
  5. The mechanical lever of connecting rod reduces the feed speed, operation more smooth and efficient.
  6. Tube feed stopper: when the spindle forward, stopper automatic drop down. Feed length is adjustable, and can be mechanical lock.
  7. Spindle feed position:ensure consistency processing of feed, while ensuring the spindle and clamp non-interference.
  8. Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.
Tooling:
  1. Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.Pipe Former with Ce Certificate (2CPV)
  2. Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.Pipe Former with Ce Certificate (2CPV)
  3. The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness.
    Pipe Former with Ce Certificate (2CPV)
  4. Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading. 
    Pipe Former with Ce Certificate (2CPV) 
     

Electric Tea Kettle

Electric tea kettle:

Quickly brew the perfect cup of tea or make pour over coffee right at the table with the Electric Tea Kettle. With 1500 watts, this Electric Kettle boils water faster than a microwave, and is safer to use than a stovetop kettle because it automatically turns off when the water reaches a boil. Serving at the table is no problem as the kettle lifts off the base without the cord. Additional features include two water level windows and a pull-lid to make filling and serving easy.

Features:

  • Thermostat Control – Having a thermostat control allows the kettle to [know" when to shut off. This will prevent damage to the heating element and is an important feature in all modern styles.
  • Auto shut off/Boil Dry Protection/Fuse – these are three features that are great for protecting the safety of users as well as extending the life of the electric kettle. The fuse and boil dry protection shut the kettle off if the water gets down below a certain level or if it`s left on for an extended period of time, It doesn`t burn up the kettle.
  • Colors and Designs – Electric kettles come in all shapes, sizes and colors. Finding one that will fit with the kitchen design is actually pretty easy. Finding one that matches and that has the features you`re looking for can be a bit harder, but with all the choices available and the newer models on the market today, you will be able to find the perfect electric kettle for your kitchen.
  • Savety in Electric- the heating element is typically fully enclosed, with a power rating of 2–3 kW at 220V. In countries with 110V mains electricity, kettles may be less powerful (1–1.5 kW) to avoid drawing too much current and requiring a very thick supply wire.

Application:

Heat the tea thoroughly

Bottle the water/beer

Boil water

Electric Tea Kettle,Stainless Steel Electric Tea Kettle,Cordless Electric Tea Kettle,Electric Cordless Glass Tea Kettle

Guangzhou Taipeng Electrical Appliances Technology CO., LTD. , https://www.taipengelectrics.com