2. Applicated for Aerospace, transportation, Medical equipment, military manufacturing, mould development, apparatus and instrument, etc. Grade Information for non-standard tungsten carbide tool parts Grade Density g/cm3 T.R.S  MPa Hardness HRA Performance & Application recommended  YL10.2  14.50 3400 92.5 Qualified for low speed rough machining,milling,titanium alloy and refractory alloy,espercially for cut-off tool and sick prick.  YG11C  14.40 2260 87.5 Qualified for molding the drills for heavy-duty rock drill:detachable bits used for deep hole drilling,rock drill torlley etc.  YG6X  14.90 1560 91.0 Qualified for machiningof chilled cast iron,alloy cast iron,refractory steel ana alloy steel.Also qualified for the machining of common cast iron.  YS2T  14.45 2800 92.5 Qualified for low speed rough machining,milling,titanium alloy and refractory alloy,espercially for cut-off tool and sick prick.  YG15  14.10 2400 86.5 Used for punch dies,stamping dies and wear resistance parts Grade Equal to ISO Category Number           Performance  uses Density Bend Strength Hardness G/Cm3 N/mm2 HRA YG3 K01 14.9-15.3 ≥1180 ≥90.5 sand-blasting nozzlesQualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting nozzles. YG3X K01 15.1-15.4 ≥1300 ≥91.5 YG6X K10 14.8-15.1 ≥1560 ≥91.0 Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron. YG6A K10 14.7-15.1 ≥1580 ≥91.0 YG6 K20 14.7-15.1 ≥1670 ≥89.5 Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc. YG8 K20-K30 14.6-14.9 ≥1840 ≥89 Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts. YT15 P10 11.1-11.6 ≥1180 ≥91.0 Qualified for rough machining, semi-finish machining and finish machining during consecutive machining of carbon steel and alloy steel. YT14 P20 11.2-11.8 ≥1270 ≥90.5 Qualified for rough machining for rough face of carbon steel and alloy steel, half process during discontinuity cutting. YT5 P30 12.5-13.2 ≥1430 ≥89.5 Qualified for rough machining for rough face of carbon steel and alloy steel and discontinuity cutting. YW1 M10 12.7-13.5 ≥1180 ≥91.5 Qualified for finishing and semi-finishing machining of refractory steel, high manganese steel and common steel. YW2 M20 12.5-13.2 ≥1350 ≥90.5 Qualified for semi-finishing machining of refractory steel, high manganese steel and common steel. Established in 1990, specialized in production carbide products more than 20 years and located in the hometown of tungsten carbide in China. We can manufacture all kind of tungsten carbide products. Our products sold to worldwide . We have built a long term business relationship with the customers from Italy, Portugal, Germany, Turkey, USA, Mexico, Russia, India, Australia and so on. Main Products Our Main products include : Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills & Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Customized cutter: Woodworking tool cutter, V-cutter, mining tool,  Any customized carbide products are acceptable. Month capacity of 15Ton We have sophisticated equipment, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine etc, Our production capacity up to 15 Ton per month. Customized is welcome, customized sample can be ready in 3-5 days and 1 day can deliver for stocks. Strictly QC We have a professional QC team follow to the System of ISO9001:2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output. Packing: Payment: Less than or equal to $1000: 100% advance via Paypal ,or Western Union Over $1000: 30% T/T advance , Balance before shipment . Foreign Sales Manager: Coco 2. Applicated for Aerospace, transportation, Medical equipment, military manufacturing, mould development, apparatus and instrument, etc. Grade Information for non-standard tungsten carbide tool parts Grade Density g/cm3 T.R.S  MPa Hardness HRA Performance & Application recommended  YL10.2  14.50 3400 92.5 Qualified for low speed rough machining,milling,titanium alloy and refractory alloy,espercially for cut-off tool and sick prick.  YG11C  14.40 2260 87.5 Qualified for molding the drills for heavy-duty rock drill:detachable bits used for deep hole drilling,rock drill torlley etc.  YG6X  14.90 1560 91.0 Qualified for machiningof chilled cast iron,alloy cast iron,refractory steel ana alloy steel.Also qualified for the machining of common cast iron.  YS2T  14.45 2800 92.5 Qualified for low speed rough machining,milling,titanium alloy and refractory alloy,espercially for cut-off tool and sick prick.  YG15  14.10 2400 86.5 Used for punch dies,stamping dies and wear resistance parts Grade Equal to ISO Category Number           Performance  uses Density Bend Strength Hardness G/Cm3 N/mm2 HRA YG3 K01 14.9-15.3 ≥1180 ≥90.5 sand-blasting nozzlesQualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting nozzles. YG3X K01 15.1-15.4 ≥1300 ≥91.5 YG6X K10 14.8-15.1 ≥1560 ≥91.0 Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron. YG6A K10 14.7-15.1 ≥1580 ≥91.0 YG6 K20 14.7-15.1 ≥1670 ≥89.5 Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc. YG8 K20-K30 14.6-14.9 ≥1840 ≥89 Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts. YT15 P10 11.1-11.6 ≥1180 ≥91.0 Qualified for rough machining, semi-finish machining and finish machining during consecutive machining of carbon steel and alloy steel. YT14 P20 11.2-11.8 ≥1270 ≥90.5 Qualified for rough machining for rough face of carbon steel and alloy steel, half process during discontinuity cutting. YT5 P30 12.5-13.2 ≥1430 ≥89.5 Qualified for rough machining for rough face of carbon steel and alloy steel and discontinuity cutting. YW1 M10 12.7-13.5 ≥1180 ≥91.5 Qualified for finishing and semi-finishing machining of refractory steel, high manganese steel and common steel. YW2 M20 12.5-13.2 ≥1350 ≥90.5 Qualified for semi-finishing machining of refractory steel, high manganese steel and common steel. Established in 1990, specialized in production carbide products more than 20 years and located in the hometown of tungsten carbide in China. We can manufacture all kind of tungsten carbide products. Our products sold to worldwide . We have built a long term business relationship with the customers from Italy, Portugal, Germany, Turkey, USA, Mexico, Russia, India, Australia and so on. Main Products Our Main products include : Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills & Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Customized cutter: Woodworking tool cutter, V-cutter, mining tool,  Any customized carbide products are acceptable. Month capacity of 15Ton We have sophisticated equipment, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine etc, Our production capacity up to 15 Ton per month. Customized is welcome, customized sample can be ready in 3-5 days and 1 day can deliver for stocks. Strictly QC We have a professional QC team follow to the System of ISO9001:2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output. Packing: Payment: Less than or equal to $1000: 100% advance via Paypal ,or Western Union Over $1000: 30% T/T advance , Balance before shipment . Foreign Sales Manager: Coco The aluminum foil tape is made of pure aluminum + glue + release paper. The product has strong adhesive force and is easy to be peeled off. It has the characteristics of radiation protection, cold resistance and high temperature resistance, thermal insulation and sealing.
Foil tape is the main material for the production of refrigerator and freezer equipment. It is also used for damage repair, pipe dressing, floor heating and insulation, pot repair and sealing, etc.For electronic products conduction, electromagnetic shielding, household and so.
Foil tape Foil Tape,House Leakage Repairing Tape,Waterproof Tape,Joint Tape Zhengzhou Enlin Import And Export Trade Co., Ltd , https://www.enlintrade.com
1.Suitable for Copper, Cast Iron, Carbon steel, Tool steel, Mould steel, Die steel, Stainless steel, Plastic, Arcylic, etc.Â
Â
Other Products
Company Information
About Lihua Cemented Carbide
In common
Firstly use inner boxes,then to outer boxes or do as customer requested.
Â
Shipping Methods:
Shipment methods: By air or sea,DHL,UPS,FEDEX,TNT or as your resquest.
Â
Mobile:Â +86 13973352165Â (available 24 hours.)
Website:Â http://en.lihuacarbide.com/
Factory Address:Â Tower A, 6th Building, Block C, Auto parts park, Tianyuan zone, Zhuzhou, Hunan, 412000, China
1.Suitable for Copper, Cast Iron, Carbon steel, Tool steel, Mould steel, Die steel, Stainless steel, Plastic, Arcylic, etc.Â
Â
Other Products
Company Information
About Lihua Cemented Carbide
In common
Firstly use inner boxes,then to outer boxes or do as customer requested.
Â
Shipping Methods:
Shipment methods: By air or sea,DHL,UPS,FEDEX,TNT or as your resquest.
Â
Mobile:Â +86 13973352165Â (available 24 hours.)
Website:Â http://en.lihuacarbide.com/
Factory Address:Â Tower A, 6th Building, Block C, Auto parts park, Tianyuan zone, Zhuzhou, Hunan, 412000, China
Repair, waterproof, sunscreen, strong stickiness,wear-resistant, anti-aging
1.Kitchen and bathroom use: anti-oil and anti-fouling, saving time and effort
2.Damage repair: leak repair, repair pot, waterproof and burn-resistant, anti-rust
3.Pipeline sealing: sealing natural gas pipelines, water heater pipelines,air conditioning pipelines, etc.
4.Electronic product shielding protection, shielding maintenance, anti-interference, signal enhancement
Tungsten Carbide Button Bits for Mining Cutting Tools
Model NO.: carbide mining
Trademark: LIHUA
Transport Package: Customized or Standard
Specification: ISO9001 SGS
Origin: Zhuzhou, China (Mainland)
Model NO.: carbide mining
Trademark: LIHUA
Transport Package: Customized or Standard
Specification: ISO9001 SGS
Origin: Zhuzhou, China (Mainland)
Tungsten Carbide Button Bits for Mining Cutting Tools
Applications:
Tungsten Carbide Button Bits for Mining Cutting Tools
Applications: