General description:
We are one of the leading Manufacturers and Exporters of a wide range of Safety Harness that is used for various industrial purposes. The Safety Harness range is extensively used by laborers during construction or any other industrial purposes so that they can prevent you from any high risk possibilities.
Products overview :
1. Raw material : 100% high- quality and high strength Dacron (polyester)
2.Provided by metal buckle and metal hook
3.Colour:made according to customer request
4.Safety ,Portability, Wear-resisting, High strength
5.Product standard:EN361:2002
Material :
Poly amide fiber
Feature :
Full body harness, 1 rear attachment point, 2 front attachment point with 5 adjustable, Safety Belt with PE gashes. Point, webbing 50mmm, yellow/green
Products show
Application:
Instruction and notice of body safety strap :
1.Take the D-ring on the end of rope to lift whole safety strap;
2.Wear shoulder strap first and properly adjust its length to make buttocks strap under buttocks, then wear leg strap and fasten button .Pay attention to keep strap straight without twist;
3.Fasten bosom and waist strap and adjust their tightness and make shoulder strap on the middle of shoulder .
4.For safety and comfort, don`t make safety strap too tight or too loose ;
5.Before using ,please check various parts of safety strap to ensure it is in best working condition ;
6.Propose not to exchange safety strap to avoid readjusting is ;
7.When safety strap appears abrasion ,split and other danger, must stop using it immediately;
8.Check safety strap once every year ;
9.Wash safety strap with cleanser ,place the wet safety strap in the shade to dry and avoid toasting it with fire or sunshine directly ;
10.After using and washing ,put it in the cool and dry place .
Safety Belt Safety Belt Harness,Safety Harnesss,Safety Belt In Construction,Safety Harness Backpack Hebei Liston Lifting Rigging Manufacturing Co., Ltd. , https://www.liftingriggings.com
Product Description
HS (R)Series Introduction::
HS(R) pump is horizontal centrifugal heavy duty slurry pump and it is designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance requirements. It will maintain high efficiency over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing bolts reduce maintenance and minimise downtime. The pumps of HS can be installed as multi-stage series.
Features:
1.Replaceable wear-resistant metal or rubber liners and impellers, long service life time.
2. Easy to adjust the space between impeller and front liner and can be removed completely when maintaining.
3.Bearing assembly use grease lubrication.
4. Seal types: packing seal, expeller seal and mechanical seal.
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Drive types: V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
7. Wide application, good NPSH and high efficiency. The series pump can be installed in multistage to meet the delivery for long distance.
Specification :
D:25 mm to 450 mm
Q: to 5,000 m3/hr
H: to 73 m
Performance Sheet:
Â
Pump
ModelAllowable
Max. Power(KW)Clear Water Performance
Â
Capacity Q
Head
H(m)Speed
n(r/min)Max.Eff.
η%NPSH
(m)Impeller
Dia.
m3/h
l/s
25HS-B
15
12.6-28.8
3.5-8
6-68
1200-3800
40
2-4
152
25HSR-B
15
10.8-25.2
3-7
7-52
1400-3400
35
Â
Â
25HHS-C
30
16.2-34.2
4.5-9.5
25-92
1400-2200
20
2-5.5
330
40HS-B
15
32.4-72
9-20
6-58
1200-3200
45
3.5-8
184
40HSR-B
15
25.2-54
7-15
5.5-41
1000-2600
50
2.5-5
178
50HS-C
30
39.6-86.4
11-24
12-64
1300-2700
55
4-6
214
50HSR-C
30
36-75.6
10-21
13-39
1300-2100
 2-4
213
50HHS-D
60
68.4-136.8
19-38
25-87
850-1400
47
3-7.5
457
75HS-C
30
86.4-198
24-55
9-52
1000-2200
71
4-6
245
75HS-D
60
86.4-198
24-55
9-52
1000-2200
71
4-6
245
75HSR-C
30
79.2-180
22-50
5-34.5
800-1800
59
3-5
245
75HSR-D
60
79.2-180
22-50
5-34.5
800-1800
59
3-5
245
100HS-D
60
162-360
45-100
12-56
800-1550
65
5-8
365
100HS-E
120
162-360
45-100
12-56
800-1550
65
5-8
365
100HSR-D
60
144-324
40-90
12-45
800-1350
65
3-5
365
100HSR-E
120
144-324
40-90
12-45
800-1350
65
3-5
365
100HHS-F
260
324-720
90-200
30-118
600-1000
64
3-8
711
150HS-E
120
360-828
100-230
10-61
500-1140
72
2-9
510
150HS-S
300
360-828
100-230
10-61
500-1140
72
2-9
510
150HSR-E
120
324-720
90-200
7-49
400-1000
65
5-10
510
150HSR-R
300
324-720
90-200
7-49
400-1000
65
5-10
510
150HHS-S
560
468-1008
130-280
20-94
500-1000
65
4-12
711
200HS-ST
560
612-1368
170-380
11-61
400-850
71
4-10
686
200HSR-ST
560
540-1188
200-450
7-45
300-650
80
2.5-7.5
686
200MS-E
120
540-1440
150-400
14-60
600-1000
73
4-10
549
200MS-R
300
540-1440
150-400
14-60
600-1000
73
4-10
549
250HS-ST
560
936-1980
260-550
7-68
300-800
82
6
762
250HSR-ST
560
720-1620
320-700
13-14
300-500
79
3-8
762
300HS-ST
560
1260-2772
350-770
13-63
300-600
77
3-10
965
300HSR-ST
560
1152-2520
380-850
11-63
250-550
79
4-10
965
350HS-ST
1200
1368-3060
380-850
11-63
250-550
79
4-10
1067
400HS-TU
1200
2160-5054
600-1400
8-66
200-500
80
4.5-9
1245
450HS-TU
1200
2520-5400
700-1500
13-57
200-400
85
5-10
1370
Remark:
1.Capacity range recommended:50%Q'≤Q≤110%Q'(Q' Appropriate to capacity at highest efficiency point).
2.NPSH: appropriate to point Q recommended at highest speed.
Application:
HS(R) series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites. HS pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump...
Â
Product Description
HS (R)Series Introduction::
HS(R) pump is horizontal centrifugal heavy duty slurry pump and it is designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance requirements. It will maintain high efficiency over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing bolts reduce maintenance and minimise downtime. The pumps of HS can be installed as multi-stage series.
Features:
1.Replaceable wear-resistant metal or rubber liners and impellers, long service life time.
2. Easy to adjust the space between impeller and front liner and can be removed completely when maintaining.
3.Bearing assembly use grease lubrication.
4. Seal types: packing seal, expeller seal and mechanical seal.
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Drive types: V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
7. Wide application, good NPSH and high efficiency. The series pump can be installed in multistage to meet the delivery for long distance.
Specification :
D:25 mm to 450 mm
Q: to 5,000 m3/hr
H: to 73 m
Performance Sheet:
Â
Pump
ModelAllowable
Max. Power(KW)Clear Water Performance
Â
Capacity Q
Head
H(m)Speed
n(r/min)Max.Eff.
η%NPSH
(m)Impeller
Dia.
m3/h
l/s
25HS-B
15
12.6-28.8
3.5-8
6-68
1200-3800
40
2-4
152
25HSR-B
15
10.8-25.2
3-7
7-52
1400-3400
35
Â
Â
25HHS-C
30
16.2-34.2
4.5-9.5
25-92
1400-2200
20
2-5.5
330
40HS-B
15
32.4-72
9-20
6-58
1200-3200
45
3.5-8
184
40HSR-B
15
25.2-54
7-15
5.5-41
1000-2600
50
2.5-5
178
50HS-C
30
39.6-86.4
11-24
12-64
1300-2700
55
4-6
214
50HSR-C
30
36-75.6
10-21
13-39
1300-2100
 2-4
213
50HHS-D
60
68.4-136.8
19-38
25-87
850-1400
47
3-7.5
457
75HS-C
30
86.4-198
24-55
9-52
1000-2200
71
4-6
245
75HS-D
60
86.4-198
24-55
9-52
1000-2200
71
4-6
245
75HSR-C
30
79.2-180
22-50
5-34.5
800-1800
59
3-5
245
75HSR-D
60
79.2-180
22-50
5-34.5
800-1800
59
3-5
245
100HS-D
60
162-360
45-100
12-56
800-1550
65
5-8
365
100HS-E
120
162-360
45-100
12-56
800-1550
65
5-8
365
100HSR-D
60
144-324
40-90
12-45
800-1350
65
3-5
365
100HSR-E
120
144-324
40-90
12-45
800-1350
65
3-5
365
100HHS-F
260
324-720
90-200
30-118
600-1000
64
3-8
711
150HS-E
120
360-828
100-230
10-61
500-1140
72
2-9
510
150HS-S
300
360-828
100-230
10-61
500-1140
72
2-9
510
150HSR-E
120
324-720
90-200
7-49
400-1000
65
5-10
510
150HSR-R
300
324-720
90-200
7-49
400-1000
65
5-10
510
150HHS-S
560
468-1008
130-280
20-94
500-1000
65
4-12
711
200HS-ST
560
612-1368
170-380
11-61
400-850
71
4-10
686
200HSR-ST
560
540-1188
200-450
7-45
300-650
80
2.5-7.5
686
200MS-E
120
540-1440
150-400
14-60
600-1000
73
4-10
549
200MS-R
300
540-1440
150-400
14-60
600-1000
73
4-10
549
250HS-ST
560
936-1980
260-550
7-68
300-800
82
6
762
250HSR-ST
560
720-1620
320-700
13-14
300-500
79
3-8
762
300HS-ST
560
1260-2772
350-770
13-63
300-600
77
3-10
965
300HSR-ST
560
1152-2520
380-850
11-63
250-550
79
4-10
965
350HS-ST
1200
1368-3060
380-850
11-63
250-550
79
4-10
1067
400HS-TU
1200
2160-5054
600-1400
8-66
200-500
80
4.5-9
1245
450HS-TU
1200
2520-5400
700-1500
13-57
200-400
85
5-10
1370
Remark:
1.Capacity range recommended:50%Q'≤Q≤110%Q'(Q' Appropriate to capacity at highest efficiency point).
2.NPSH: appropriate to point Q recommended at highest speed.
Application:
HS(R) series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites. HS pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump...
Â
Centrifugal Coarse Sand Handling Sludge Suction Pump
Model NO.: 100HS-D
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pumps
Type: Centrifugal End Suction Slurry Pump
Material: High Chrom Alloy, SA05 27%, ASTM532, Classiii
Casing: Horizontal Split Casing Pump
Color: Any
Application: Sewage
Power: Electric
Slurry Pump Type: Heavy Duty Slurry Pump
Slurry Pump Seal Type: Packing Seal / Expeller Seal / Mechanical Seal
Trademark: Sunbo
Transport Package: Free Fumigation Wooden Crate
Specification: ISO; CE; SGS
Origin: China
HS Code: 841370
Model NO.: 100HS-D
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pumps
Type: Centrifugal End Suction Slurry Pump
Material: High Chrom Alloy, SA05 27%, ASTM532, Classiii
Casing: Horizontal Split Casing Pump
Color: Any
Application: Sewage
Power: Electric
Slurry Pump Type: Heavy Duty Slurry Pump
Slurry Pump Seal Type: Packing Seal / Expeller Seal / Mechanical Seal
Trademark: Sunbo
Transport Package: Free Fumigation Wooden Crate
Specification: ISO; CE; SGS
Origin: China
HS Code: 841370