Our High Frequency Welding Tube Mill is intended for manufacturing of round pipe of Φ16mm-Φ127mm with thickness of 0.5 mm–5.0 mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.
Finished product can be of round, square or rectangular pipes.
Length Tolerance: 0-3mm
Inner diameter: Φ580-Φ610mm
The maximum weight: 5.0 tons
Electric installed capacity: appro 450KW
g) High Frequency Welding Tube Mill speed:
30-90m/min
7. OEM brand.
30% T/T, Balance to be paid before shipping after inspection.Also we accept the payment L/C, O/A , D/P.
3. What is your after-sale service ?
High Frequency Welding Tube Mill warranty period is 24 months, if the broken parts can't be repaired, we can send new to replace for free, but you need to pay the express cost yourself. we supply the technical support for the whole life of the equipment.
4. How to visit your factory ?
Steel Pipe Roll Forming Machine Steel Pipe Roll Forming Machine,Carbon Steel Pipe Making Machine, High Frequency Welding Pipe Making Machine,Steel Pipe Making Machine Zhongtuo Roll Forming Machinery Co., ltd , https://www.frameforming.nl
The microprocessor controller of the automatic warp machine is used for data exchange between the warp machine and the rack. Data is transmitted and converted through a dedicated channel. The sensor mounted on the warping machine continuously measures the tension of the upper and lower layers through the skein and sends the obtained data to the microprocessor; then compares the actual measured value with the set value and immediately sends the offset value to the machine. frame. The frame is adjusted to the set value by the servo motor.
The good cooperation of the various components of the equipment allows the machine to achieve reliable knotting, and the knotting process is completely automatic, and the good knots also reduce the needs of personnel.
High Frequency Welding Tube Mill
Pipe diameter: Ø16–Ø127mm
Pipe Thickness: 0.5– 5.0mm
Pipe Length: 6-9m
Material: Low Carbon steel (δb≤500Mpa, δs≤235Mpa)
Strip steel thickness: 0.5mm-5.0mm
Dynamic power: AC380V±10%, 3phases, 50Hz±10%
Control Power: AC220V±10%, one phase, 50Hz ±10%
Reservoir for High Frequency equipment:15 m³, one set
Reservoir for circulating cooling water:15 m³, one set
f) High Frequency Welding Tube Mill Compressed air:
Pressure: 0.4Mpa
Flow: 0.5m3/h
Why choose to cooperate with us ?
1. We are professional manufacturer, so we can offer better price and after-sale service and shorter delivery time.
2. We have strong design & technical ability, we can design and manufacture as customer's requirement.
3. Our factory has been approved ISO 9001 certificate.
4. We have much experience for installation and training experience overseas.
5. We have successfully exported our machines to more than 90 countries, We all get good feedback.
6. We provide a free two years warranty for all our items.
1.How to get a quotation of tube rolling line ?
Give me the diameters and thickness for the pipe .
Other spicific requirements is welcome, such as the speed,power and voltage you want.
2. Terms of payment ?
b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.
German Knotex develops automatic knotting machine
It is reported that the automatic frame (Autoframe) produced by Knotex Machinery Manufacturing Co., Hamburg, Germany, can fully automate the knotting process.