Plastic Flowmeter is a widely used instrument in water treatment engineering, mainly used for flow detection, usually installed after the water pump, to control the water intake of each structure, currently the most widely used are electromagnetic flowmeter and ultrasonic flowmeter.
In the selection of the flowmeter, the first thing to consider is the corrosiveness of the measured medium to the flow-passing parts, so as to avoid affecting the service life of the flowmeter due to the corrosion of the medium;
During the design and installation process of the flowmeter, the length of the straight pipes before and after the flowmeter needs to be considered. Usually, the principle of 5D before and 3D after the flowmeter is followed. Here, D is the inner diameter of the pipe. If the length is insufficient, the measurement accuracy will be affected. When using an ultrasonic flowmeter, the distance between the first 10D and the rear 5D must be met, and the distance from the flowmeter to the water pump must be more than 30D.
When selecting the type, the flow rate of the medium in the pipeline needs to be between the maximum value and the minimum value of the selected flowmeter, and avoid approaching the maximum or minimum value, so as to avoid affecting the measurement accuracy.
Plastic Flowmeter,Acrylic Flowmeter,Solenoid Valve,Liquid Filled pressure gauge Hebei Chengda Water Technology Co.,Ltd. , https://www.arclionchengda.com
TEKORO Choke & Carb Cleaner is designed to provide a high delivery and fast cleaning action. It can be used through the carburetor when the engine is running. It penetrates quickly to loosen and clean away varnish, oil, gum, etc. on automatic chokes, carburetors, manifolds, heat controls and positive crankcase ventilation valves.
Â
Features
Unique through-the-engine formula can be used while the car is runningÂ
Can be used on cold, warm and running enginesÂ
Oxygen sensor safeÂ
Low-odour, fast-drying, high-delivery rate with quick cleaning actionÂ
Excellent solvency will attack painted surface (avoid spraying on painted area)Â
Â
ApplicationsÂ
CarburetorsÂ
Choke & Linkage AssembliesÂ
PCV ValvesÂ
Oil pans & transmissionÂ
Â
Directions For UseÂ
To remove deposits such as varnishes, oils, gum & other residuesÂ
Shake the can wellÂ
Hold can upright and push actuator all the way down to apply uniform sprayÂ
If using the extension tube, insert it into the actuator using a twisting motionÂ
Best results are obtained when material is at room temperatureÂ
Packing details:
Volume
Pack Qty
Carton Specs.
Carton Dimension (estimated)
Container Qty (cartons)
L(cm)
W(cm)
H(cm)
20FT'
40HQ
250ml
24pcs/ctn
Kraft paper
33
22
17
2500
5600
400ml
12pcs/ctn
Kraft paper
27.5
20.5
20.5
2500
5600
650ml
12pcs/ctn
Kraft paper
27.5
20.5
29
1816
3294
Â