With the development of modern machinery processing industry, the requirements for the quality and precision of cutting have been continuously improved, and the requirements for improving production efficiency, reducing production costs, and having high-efficiency automatic cutting functions are also increasing. As a part of the Cutting Machine industry, the products we provide will be the most modern and technological. Welcome everyone to discuss cooperation. Details:/ Electronics Production Machinery
SF-580is a Automatic Lead Cutting And Bending Triode Forming Machine.Size:1500x1000x1500
1.Apply to LED/light emitting diode,Triode Forming cutting Machine,aluminum electrolytic capacitor,metallic film capacitor,safety capacitor,quartz crystal and other upright type elements.
2. Import CAM mechanical transmission,precise stable,durable and low noise. Each part has the special hard coating with long service life.
3. The led Lead Forming Machine whole set of system is used PLC control with ultra strong stability.The operator interface is touch screen convenient and easy to lean and the data alignment is more convenient.
4. Speed control of the non-phase fine adjustment of transducer.
5. Upper clipand open clip system are rack and pinion type.The change of fixture centerline is invariant,no harm by clipping and more convenient to change the specification.(D4--(D6are shared the same fixture and(D8-(D10are shared the same fixture.
6. Molding pitch:2.0mm,2.5mm,5mm,7.50mm,10mm,15mm,20mm,25mm
7. Molding/feet cut method:odd leg,90℃bending,incurvature, excurvation and vertical angle,etc.
8. Length of feet cut:2.5mm-28mm.
9. Working pressure:4kg/Cm2
10.The special molding pattern can be customized according to the clients different requirements.
11. The equipment is anti-static.
The Bulk Resistor Radial Cutting Machine is suitable for shaping and cutting feet of various electronic components.Any details you want to know about Automatic Lead Forming Machine please contact us for further more.
Electronics Production Machinery SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.szsingsunautomatic.com
For non-closed state cutting graphics, first of all, it is impossible to pass the process design. However, in the actual use process, the problem of cutting is not closed. The main reason can be summarized as two major aspects of hardware and software, in which the hardware failure is relatively simple. Incomplete cutting torch operation is the fault of the drive motor in most cases. The relevant processing methods are also very direct, replacing or repairing the walking motor. If the hardware is excluded, the software failure is related to the CNC system. The main reason is that the CNC system The software does not have cumulative error correction. For users to quickly understand whether the purchased CNC system has the above functions, the detection methods are described as follows: (China Cutting Machine Trading Network)
In order to detect the accumulated error correction function of the CNC system software, the NC code can be converted into AutoCAD graphics. Then, under AutoCAD, it is checked whether the introduction of the closed contour and the end point of the lead line are completely coincident, if they are completely overlapped (contour closed). Accumulated error correction technology is available. If it is not closed, the process can be compiled. The system will automatically prompt us that the graph is an unclosed graph. At this time, you only need to make a 0.5mm lead-in, then set the parameters and output the graph. Transmitting to CNC flame cutting machine can complete the cutting.
ã€China Cutter Trading Network is now giving back to the old and new members, special advertising space for free experience activities, a golden opportunity, first come first served. Log on to the official website for the latest information:/
Editor: zgqgjjyw