With the improvement of people's pursuit of quality of life, more and more people will look to the SUV when choosing a car. However, for a friend whose wallet is not rich, choosing a second-hand SUV becomes a Good choice. However, there are many used SUV models and the condition of the vehicles is very complicated. How should we select second-hand SUVs? At present, the customers of the second-hand SUV market can be divided into two major categories. The first category is conversion-based off-road fans. Most of the models selected by these owners are hardcore SUVs or some pure-blood SUVs. The second category is based on practicality. The choice of SUVs by the owners of these vehicles is spacious and practical. Most of the owners of second-hand SUVs enjoy outings. Some enthusiasts will even go to red sand dunes and cross-harbor roads, which are often referred to as buggy fans. Therefore, when selecting second-hand SUVs, the inspection of the chassis is also necessary. Be extra careful. At present, there are two types of chassis structures in the SUV series that are currently on the market. One is a load-carrying body, such as the Grand Cherokee, Audi Q5, and the other is a non-bearing body. The representative is Toyota Prado, Lan. Deku Luze et al. No matter what kind of chassis structure, consumers should carefully check the used car when picking, after all, the situation of the chassis is good or bad, determines the quality of a car's driving status. Let's talk about carrying body. Since the chassis of the load-carrying body is integrated with the body, there is no independent beam. Therefore, this kind of body-shaped SUV is relatively easy to be injured during off-road, and this kind of wound is difficult to recover and will directly affect Driving performance and vehicle durability. When checking the chassis, pay special attention to whether the anti-corrosion of the chassis is normal, whether there is serious deformation or cracking, and there is no trace of re-welding. For non-loaded bodywork, the chassis has an independent girder and is separated from the body, which enhances the rigidity of the vehicle when off-road, but relatively speaking, the non-bearing body is inferior to the load-bearing body in terms of comfort. In the selection of such models, we must pay particular attention to the integrity of the beam part, with or without corrosion, deformation, or serious injuries, but also check the chassis and the body of the connection is loose or deformed. Chassis parts with or without oil leakage, cracking, etc., is one of the criteria for judging whether the vehicle is good or bad; in fact, it is not necessary to care too much about the corrosion of the exhaust pipe, but there should be no perforation in the corrosion, and the deformation can be done. Do not know how to pick second-hand SUV owners can follow the above steps to detect, of course, for the average consumer, when picking second-hand SUV, you can find the opportunity to lift the vehicle to lift the inspection, and this It will depend on consumer road tests to judge whether the chassis is good or bad. During the road test, we recommend that consumers check whether the vehicle is running out of direction, whether there is abnormal sound and vibration from the chassis, if there is a problem, it is best not to choose the car easily. Metal Lathe Mill Combo,Combination Lathe Mill,Combination Drill Lathe,Emco Combination Lathe WEISS MACHINERY CO., LTD. , https://www.weissmachinerys.com
See the national second-hand SUV 
View National Used Land Cruiser