Hywell Machinery company proffesional to design and manufacture the Low Temperature Drying Machine that include HW Conical
Screw Vacuum Drying Machine/conical screw Vacuum Dryer , SZG Rotating Vacuum Drying Machine/Rotating Vacuum Dryer, Double Conical Dryer , Helical Ribbon Vacuum Dryer,Rotating Vacuum Dryer ,Dryer welcome to contact us and we will offer competitive price !
Low Temperature Drying Machine is heated steam or hot water. Raw material is fed into machine and also under vacuum state when it is drying process. The moisture is evaporated and removed rapidly and the raw material is
dried quickly.The
loading and unloading are quick, light and clean, meet the requirements of GMP!
Dynamic Vacuum Drying Machine,Double Conical Dryer,Helical Ribbon Vacuum Dryer,Rotating Vacuum Dryer,Dryer,Drier Changzhou Hywell Machinery Co,.Ltd , https://www.hywell-dryer.com
The non-contact optical measurement method not only eliminates the paper break caused by the accumulation of holes, resin and stickies, but also breaks the paper due to the contact between the old sensor and the web, and does not break on the sensitive paper. Leave a mark.
Practice has shown that the measurement results of this sensor are very consistent with the traditional magnetoresistive scanning sensor, off-line experimental banner measurement and standard industrial laboratory measurements. Precise and reliable banner measurement with this sensor can be used to control the uniformity of the web thickness and ensure a reasonable structure for large and rewind rolls.
Metso Automation introduces new thickness scanning sensor
Metso Automation has introduced a new thickness scan sensor. This sensor uses precise, contactless optical sensing technology. IQCaliper-L is the only thickness scanning sensor that combines new optical technology with magnetoresistive technology. In traditional thickness sensors, magnetoresistive technology has been used for many years. Due to the same precise magnetoresistance technology, the mechanical deviation produced by the scanning sensor during lateral operation does not affect the thickness measured optically.